I have windows 7 and my dynadock CD is for VIsta. Where can I download the proper version?

Guide to troubleshooting Windows audio and sound problems
TRY THE LINK ABOVE AND ALSO YOU CAN GET THE DRIVERS FROM BUILDER OF THE PC MOST OF THE TIME.

Here are the links to the available downloads from Digital Blue:

QX5/Smithsonian Computer Microscope Drivers for WIN ME, 2000, XP, Vista 32-Bit

Download Drivers

QX5 V2 Computer Microscope Drivers for Windows Vista 64-Bit

Download for Windows Vista 64-Bit

QX5 V2 Computer Microscope Drivers for Windows 7

Download Windows 7 32-Bit

Download Windows 7 64-Bit

QX3, QX5 V1, QX5 V2 Computer Microscope for Mac OSX 10.4-10.6

Visit Webpage for Download

QX5 Computer Microscope V1 Video Codecs for 32 bit versions of Vista/Windows 7

Download Codecs

Please follow this link for the DYNADOCK U Windows 7 64 bit drivers: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=SB&os=&category=&moid=2313405&rpn=undefined&modelFilter=&selCategory=2756711&selFamily=1754942

Also, these drivers will work for Windows XP SP2/SP3, Windows Vista 32 bit & 64 bit, and Window 7 32 bit.

You should also consider downloading the driver utilities that are linked from the same page.

Thanks for using FixYa.

The drivers for Vista should work just as well for Windows 7. This is true with almost everything about Windows 7; in fact, Windows 7 is actually NT kernel 6.1! (Vista is NT kernel 6.)
1) Go here: http://support.asus.com/download/download.aspx 2) Type M2N-MX into the search box on the left. 3) Select M2N-MX from the results. 4) For your OS choose Vista 32-bit if you installed the 32-bit version of Windows 7 or Vista 64-bit if you installed the 64-bit version. 5) Have fun.
Good luck.

u hav no balls fix it urself!

you should use the cd to download it i bet itll work

-a person
peace love and robert pattinson

Hi...

If you want to download windows vista, you just go to Microsoft website, then go to the products, remember you can download and try for the windows vista with in 15 days, because they are not giving full version, because they are selling, and you can not get the license without buying their products, The microsft not allowed the piracy.

Regards
PCmania

Not to worry. Please go to the following website and you can download all the latest setup software from Toshiba.

http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1754943&rpn=&modelFilter=PA3541U-2PRP+dynadock+VGA&selCategory=6&selFamily=1754942

Download the dynadock Installation Software (v2.3C; 06-02-2008; 181M) first, then the Video Driver Update Version 4.5.14974.0 for dynadock (v4.5.14974.0; 12-18-2008; 8M) and LAN Driver Update Version 3.8.3.7 (v3.8.3.7; 11-20-2007; 1M) and finally the dynadock™ Audio Driver V6.0.7.216 (v6.0.7.216; 08-27-2007; 6M)
Install the installation software furst, then the other 3 can be done in any order.

If you run into any further configuration issues, the manual is available here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1754943&rpn=&modelFilter=PA3541U-2PRP+dynadock+VGA&selCategory=6&selFamily=1754942

Hope this helps!

Windows Vista supports mirror mode only; XP supports extended mode and mirror mode. Visit dynadock.com for updated Windows XP and Vista software driver support.

Windows Vista is supported by Nero 7 since the version Nero 7.5.7.0.. Older versions of Nero 7 do not support Windows Vista. If you are trying to install Nero 7 from your original disc it is likely that there is an older version included on this disc. If you want to install Nero 7 on Windows Vista please be sure that you will only use latest Nero 7 version, you can download from the below website. Also please be sure that there won't be any rests of old Nero 7 versions on your system by performing the following steps:

1.
Start uninstalling all old Nero 7 applications and files from your computer using the Nero 7 CleanTool

Download the Nero 7 CleanTool using the following link:
Click here.
Save this file to your desktop.
Unzip the ZIP-file with WinZip or WinRAR and save the content to your hard drive.
Double-click on the unzipped EXE-file to start the CleanTool.
The window “Nero General Clean Tool” will open. The installed Nero version will be displayed.
Activate the checkboxes in the displayed Nero version.
Then click the “Clean” button.
A status window will open.
The execution of the tool may take several minutes.
Please wait until the progress bar has moved completely to the right.
In the window “Nero General Clean Tool” click the “Exit” button as soon as the erasing procedure is completed.
Reboot your computer.
The Nero 7 CleanTool has removed all Nero entries from your computer.

2.
To install the latest Nero 7 version, please proceed as follows:
(Note: do not install a previous Nero 7 version from an installation CD now, but download and install the latest version of Nero 7 from our website. All Nero 7 download versions have the full range of functions as an original Nero 7 installation CD. There is no need to install a previous version of Nero first.)

Download and install the latest Nero 7 version from website using the following link:
Click here.
Save this file to your desktop.
Double-click the downloaded Nero 7 installation file to start the installation.
Enter your Nero 7 serial number during the installation to make your Nero into a permanent version. (The download without a serial number is a trial version only).
You now have a newly installed version of Nero 7 on your computer.