Sharp copier AR5316 how to enter simulation mode and change setting destination from asia?

1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"#" key "*" key "C" key "*" key



OR

"#" key "INTERRUPT" key "C" key "INTERRUPT"

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hi,
To enter simulation mode you need to press the following 4 buttons in quick succession:
# * C *
The # & * keys are to the left & right, respectively, of the zero key,
the C key is the red C to the right of the number 3 key.
Hope this helps

Try pressing #, *, C, *, to get into the simulation mode. To change user settings, try the menu feature. Good luck.

Setting the destination Description

Switches the operations and screens of the machine according to the destination.

Purpose

To be executed after replacing the backup RAM on the main PCB or initializing the backup RAM by running

maintenance item U020, in order to return the setting to the value before replacement or initialization.

Enter Maintenance Mode
Enter "10871087" from keypad, You should now be in maintenance mode.
Enter "252"press "Start / Print" key.
Select your destination from list on the display.
Press "Start / Print" key.
Enter 001 "Start / Print" key to exit to normal display.

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select the destination using the cursor up/down keys. The selected item is displayed in reverse.

Display Description

JAPAN METRIC Metric (Japan) specifications

INCH Inch (North America) specifications

EUROPE METRIC Metric (Europe) specifications

ASIA PACIFIC Metric (Asia Pacific) specifications

2. Press the start key. The setting is set, and the machine automatically returns to the same status as when

the power is turned on.

Completion

To exit this maintenance item without changing the current count, press the stop/clear key. The screen for

selecting a maintenance item No. is displayed.

* Entering the simulation mode
1) Copy mode key ON ? Program key ON ? Asterisk (*) key ON ?
CLEAR key ON ? Asterisk (*) key ON ? Ready for input of a main
code of simulation
2) Entering a main code with the 10-key ? START key ON
3) Entering a sub code with the 10-key ? START key ON
4) Select an item with the scroll key and the item key.
5) The machine enters the mode corresponding to the selected item.
Press START key or EXECUTE key to start the simulation opera-
tion.
To cancel the current simulation mode or to change the main code
and the sub code, press the user setup key.
* Canceling the simulation mode to return to the normal mode
1) Press CA key.

I answered it right now

semuletion cod 26-6
4 for asia

go to cod condition(# interrupt c interrupt) LCD turns off.enter 26 press copy enter 6 press copy enter 4
then copy.

enter cod 26-6 then 4 press copy key

1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"#" key Interrupt key "C" key Interrupt key
Main code Start key Sub code Start key