SOURCE: No image during recording -- sharp mini dv VL-NZ50
This problem can certainly be fixed and is not that expensive : the no image in capture mode when you can playback is caused by faulty CCD sensor and you might even have it done free of charge because it is often a faulty sensor that goes in your camera during manufacture. Sony in particular repairs these faults free of charge, but others do too.
SOURCE: sharp dv-rw260h vcr/dvd combi
The tape drive and head cylinder motors are having trouble
synchronizing close enough to allow the manual tracking to work.
Does it work on prerecorded tapes?
Could be:
Too much drag from the tensioning gizmo. (fixable)
Dirty tape path (fixable)
Damaged tape (does it have a crease along one edge?
dragging motor (not usually fixable)
Hope Ya Fix It!
SOURCE: copy from camera to computer
Do you have a video/tuner card that can receive a video input? With ** av in, or firewire on your computer, you can't without purchasing additional hardware.
SOURCE: i need a dv cable
i just got a new camera the dimagne x50
and i brang it out today and it was working fine it didnt drop or anything
i took a picture then turned it off then i turned it on agian and when it was on the camera format the light kept on blinking yellow for the longest time and wouldnt let me take a picture so i tried the video format and it worked so im just wondering why the video format is working and not the camera ?
has this happened to you? is there any way of fixing it?
94 views
Usually answered in minutes!
×