Re: Restricted flow on the middle group of a three group...
Either the water is restricted at the flowmeter pipes usually the on leading to the solenoid, or the solenoid needs to be checked, the inlet hole might be blocked.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have a bad air mass sensor (air flow meter) Either that or a very restricted exhaust, like a catalytic converter plugged up or came apart and is restricting the exhauxt flow. A restricted fuel filter, if you haven't changed one in a very long time, could also cause your symptom.
A true overheat is when the coolant is bubbling back into the coolant recovery tank. #1 radiator cap not holding pressure #2 stuck thermostat #3 restricted air flow #4 bad fan clutch #5 bad waterpump #6 restricted water flow in radiator #7 blown head gaskets this is the end results to a overheated engine .
This sounds like an overheat issue. I suspect that something has restricted the air flow. Air flow is required for function and to cool the motor. if the air flow is restricted a thermal limiter opens the circuit, rather than have a fire.
If you are using Internet explorer, go to tools-Internet options click the security tab at top of window, select restricted sites icon, another window will open, then select the sites button. Then scroll through the list of sites until you find youtube, select it and press the remove button. That should do it. You will need admin privileges to do this.
If your talking about no air flow, at the vents, floor,defrost, there are no doors that will restrict air flow, then you have a plugged Ac evaporater core, with foriegn matter, leaves, dirt, and oil from the ac itself, leak in evap leak cause this, as long as the blower is working on all speeds, remove the motor for inspection and evap , an other way to inspect the evap, remove the evap sensor grommet, look inside of hvac, the core will be plugged, this is an expesive repair to do. GOOD LUCK. RDJRP
MOST CARS TEMPERATURE GAUGE STAY IN MIDDLE.THATS NORMAL.BUT IF THE TEMPERATURE GAUGE STARTING CLIMBING TOWARD HOT WHILE DRIVING YOU GOT A PROBLEMS.THE THERMOSTAT STICKING CLOSE.LOW COOLANT OR RESTRICTED RADIATOR.POOR AIR FLOW.GRILLE RESTRICTED.
You may have a restricted flow meter. If the flow meter does not spin when you open the steam knob the boiler won't heat. A chip of bean that got into the water receptacle and when the water tank was replaced the chip flowed to the flow meter and restricted it. Now it won't spin and the boiler won't heat.
Hi Sounds like your flow meter is restricted with the usual chip of bean. The flow meter spins when the pump is moving water. There is a small opening in the intake side of the flow meter and this creates a jet of water that spins the flow meter. When the flow meter is spinning the machine is happy, but when the intake gets restricted the water doesn't spin the flow meter and the machine says ventilate. It wants the flow meter to spin and be happy. You could possibly fix it your self if your handy, other wise let the pros do it.
×