The Datemark will not print the time, only the date shows.

http://www.retrevo.com/support/Dymo-DateMark-Date/Time-Stamper-Printers-manual/id/21399bh032/t/2/
Above is your user manual, it is all in there for you.

open password kenwood walkie takle tk480

this site will solve ur problem www.worldstart.com/tips/tips.php/642

Click on Page Setup

Click on Custom Header or Footer, depending on where you want to see date and time.

You will see Left, Center, Right Sections, place your cursor wherever you want to set date and time.

You will also see 9 Icons above 3 sections, mouse over on Icon and it will show what they are.

Click on time and set the time

Click on Date and set the date

You can also add your header image by adding image to it.

I hope you will be able to get it.

Cheers

Hi Patricia,

First, try doing sequence power cycle by turning off the printer, computer and the router (if you're using one attached to your system) to make sure everything works perfectly in the printing process. Moreover, you may try to open the back cover where the batteries are and press the pinter reset button to refresh the printer settings. best regards, Jazerblue

Open the battery compartment and use a paperclip to push the printer reset button

mine is doing the same thing. I read that the 3V battery may need to be changed.... so I changed the 3V and all four AA batteries and hit reset and am still experiencing the same as you. Random **** printing when display seems okay. Never same stuff twice. Very frustrating.

You might try connecting the USB cable directly to one of the computer's USB ports.  My scale (DigiWeigh) showed as not connected when it was connected to a USB hub.  When it is connected directly to the computer, it shows the scale as connected.  Unfortunately, it still won't transfer weights to the Dymo Stamps software.

What prints different?
What Display Screen?
What are talking about?
Buckup
full details gets the answer
I know about computers
I am not into mind reading
Assuming you have one that is?

if it is an older model [2001 or so] you just gently put your hand over the top like your going to pick it up but just push down and slightly forward. there is a button on the underside.