Quasar TV/VCR combo - can't find "video or line" to hook up Jeopardy game.

if you've tried video 2 then you should hook a vcr to the tv then put the video and sound cords in the vcr. turn it on turn the tv to channel 3 and hit the vcr/tv button then the game will show up on your quaser color tv

here the Codes for the Quasar TV VCR VCRC Quasar 0035, 0162

The remote model number for the Quasar VV2008 is VSQS1570 and can be ordered from Panasonic at 1-800-221-7262 or Go to a Family Dollar store and purchase the grey RCA universal remote for $6.00 about 6 inches in length. When you are ready to program it for the Quasar VV2008 push the code search button then the VCR button and enter 0162 then push enter. The red light should go off and the remote should turn the TV/VCR off and on. It worked for me 4/19/2013

Look in the back or the front of ur tv have a (Video Audio holes In).Look in ur DVD player in the back or the front have a (video Audio holes Out).Used a component AV video cable hook both devices together.Find the Video Mode in ur tv 1 or 2,now play the DVD player with a dvd disc.Now u should be playing the content of the dvd disc.If u don't have a AV video cable,tries websites like Amazon.com,Ebay.com to buy a set of AV video cable.

Well. I finnally figured it out. All you need to do is hook in the cable and let the cable program set to the channels.

can you please send me the tv vcr combo code for my philips remote, to the old quasar tv. thank you [email protected]

Quasar tv/vcr 0374 0381 0035 0162

These are the only ones I found for the combo's

Try this site:
http://www.remotecodelist.com/remotes/

Bill

Hi,

Yes, for a workaround. The adapter would be 2 RCA female to 1 RCA male. You have to connect both the red and white to the female RCAs and use the male to connect to the TV's Audio INput. The yellow goes to the video. There should be no negative technical effect other than lost of stereo quality. The audio output of the DVD is line level and could normally tolerate this condition.

The correct method is to use a simple line level audio mixer and mix the L& R audio signal to produce a mono signal or to use a stereo amplifier for the sound output.

Hope this be of some help/idea. Pls post back how things turned out or should you need additional information.

Good luck and kind regards.