Question about RCA 36V430T 36" TV

Open Question

I dont get cable service in my area. i want to hook up a digital antena but i dont know if my set is digital capable or do i need digital converter box? it's a rca 36" modl# 36v430t

Posted by Anonymous on

Ad

5 Related Answers

zimcloud

  • 135 Answers

SOURCE: 36 inch RCA 36v430t

Mike-It looks like the power supply is going on your tv-it can be replaced. This happens, usually, when little kids are playing wth the remote or power button on the tv. Turn it off and on a whole bunch of times in a row, kids love to do that, and it burns out the power supply part- to make a CRT tv like your RCA36 incher- which is a beautiful machine- I have the RCA/PROSCAN 36 incher-LAST longer...You should always wait 5 min between turning it off and on. Don't ever sell it. This one is worth fixing. It has better color and sound Than the new plasmas and lcds-The Pros know this. Be carefull, they might try and talk you out of it-so they can fix it and have it for themselves. So what if it's not High Deff. It's a great set.

Posted on Jul 02, 2008

Ad

zimcloud

  • 135 Answers

SOURCE: 36 inch RCA tv (model # 36V430T)

I wouldn't advise doing it yourself. All you have to do to kill yourself is touch the wrong part connected to the magnets on the back of the tube-even if it has been unplugged for a couple of days- no joke. The repair place will be better able to track down the part, and install it, and guarentee it. Be aware- it might take a week or two for them to just get the part-then they have to install it.

Posted on Jul 02, 2008

Ad

ABRsvcs

  • 4234 Answers

SOURCE: rca 36" 36v430t

Without seeing the actual set, I can only suggest some of the common things that can cause this. Based upon your description, I would first look for a poor solder connection where the AC cable connects to the board. Look in that area for any charred spots. Let me know if there are any. The bussing usually is arcing of the AC power.

Dan

Posted on Oct 27, 2008

jumon

  • 18 Answers

SOURCE: I have an RCA converter box hooked up to an RCA tv

Basically, you cannot use the coax connections for both the VCR and the RCA converter box. I would hook up the phono/cinch connectors from the VCR to the TV if you can (these are also called RCA connectors, but I'm avoiding using that name so we dont confuse the digital receiver with a cable/connector name that is the same here). There should be a yellow one for video and red/white ones for left and right stereo. I believe the RCA converter comes with a three headed cable that can do this for you. With this configuration, you can set the TV to input on these connectors and the VCR should always output there. Once that is set, you can still use the converter box to receive the signal from your antenna, then run the coax to the VCR. Now, the VCR will always have to be set on channel 4 in your setup and you will need to manually change channels on the converter box for it to record a show. Does this make sense so far?

Posted on Feb 27, 2009

Anonymous

  • 93 Answers

SOURCE: my 36 rca modle f36715 makes a beeping noise and

the beeping sound means that you a shorted regulator and possibly a hign voltage transformer.shop time

Posted on Sep 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i make my vizio vx37l recive high definition antena signal


Go into menu and find TV input area--- change from cable to antenna

Mar 03, 2015 | Vizio Televison & Video

1 Answer

Do you need a cable box for it


U mean a digital converter box for getting free broadcasting DTV airing channels?No,this tv it is a digital tv,just require a roof or a good digital antena.Hook it up with the antena and goto tv menu go to setup go down to Ch.pick AIR not CABLE and go into scanning for DTV channels after that tv will get all the free broadcasting DTV air channels.

Feb 17, 2011 | Toshiba 19HLV87 19 in. LCD HDTV

1 Answer

Do i need to buy a converter box for this tv


No,this tv is a digital tv,just reqiure a good antena like a digital antena or a roof antena.Hook it up.Just go into tv menu setup and set up to pick up AIR not CABLE and enter to scan for DTV free air channels.

Feb 01, 2011 | RCA L26WD26D 26 in. LCD TV

1 Answer

JUST BOUGHT A NEW SAMSUNG TV WITH BUILT IN FREEVIEW BUT CAN'T GET ITV4 AND FILM4. CAN ANYONE HELP? BEEN READING SOME OF YOUR PAST HELP MESSAGES RE - RETUNING WITH REGARD TO TRANSMITTERS, BUT THIS LOOKS...


U have a roof or a good antena like a Digital antena?Take that antena wire hook up to the tv hole that said ANT.Now,turn on the tv.Push the button said menu on the tv remote,go to SETUP,go down to CH. push and pick AIR Not CABLE push it again.Now the tv will auto searching for all the DVTV free air stations in ur area.After this ur tv should getting all the free air DTV broadcasting signal in ur area.

Oct 27, 2010 | Samsung LE37R72B 37 in. HD-Ready LCD...

1 Answer

I need to connect a digital bos to my emerson 1304 tv.i can not find any place to connect the coax


The antena hole input in the Converter box that where said the input source said Ant.,use a antena like a digital antena,roof antena or a rabit ear antena.Hook up ur source of the antena go in that hole.The hole input said out to tv in the Converter box,use a cable that was supply to u,came with the Converter box.Use that cable plug in the Conveter box tv hole said out to tv.The other end of that cable go to ur tv Ant. hole.Now u got it all hook up.Turn ur tv to channel 3 or 4 now u got a menu from the Converter box,go down to the highlight word said scan channels,push that highlight word.Ater the scan are finish,u will now get all the free DTV channels.

May 05, 2010 | Emerson EWC1304 13 in. TV/VCR Combo

1 Answer

How can we view cable TV when the TV doesn't have a tuner?


Ur tv is a digital tv.Just buy a Digital antena or a roof antena hook it up.Go to SETUP menu go down to CH. SETUP pick AIR,not CABLE and than enter to scan.After ur tv done scanning,u will get all the free air DTV channels.

May 01, 2010 | Olevia LT37HVS 37 in. LCD HDTV

1 Answer

Power antena after markit how to make it work with radio


on the radio there is a cable that is for Power Antena you might have to set a cable out to the area you are instslling the antena if this car already had a power antena you only need to hook up the leds from the old if not then like i said you need to get positive cable out to the antena and ground it to chassis

Apr 01, 2010 | 2000 Mercury Sable

2 Answers

Cannot receive channels past 99


Is this free over the air signal?Get a better antena like a roof antena or digital antena.Rescan again after everything hook up.If this Cables,satalites,or telecom signals,unplug,replug the box for bootup and software
upgrage,go to ur tv menu make sure it on cable setting,rescan it again to get all fresh channels.

Nov 04, 2009 | Symphonic ST420FF 20" TV

1 Answer

I have a samsung 50" plasma tv with biult in freeview how do i tune it for the change in new freeview channels


Have a digital antena or a roof antena set up use the
end of the coalix cable hook to ur input antena hole u done,go to the menu make sure u in air setting not
cable,press scan u should get what in the Free air signals.

Sep 30, 2009 | Samsung 50 in. Plasma TV

1 Answer

I dont have satelite or cable how do i get tv channels?


you can go and get an indoor digital antena from any electrical store and hook it up. you can then scan for the local channels.

Jun 18, 2009 | iLO 3200 32 in. LCD Television

Not finding what you are looking for?
RCA 36V430T 36" TV Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...