CLIQ Cell Phone: i accidently locked mu sim card and i dont know th...

PUK Code
PUK stands for Personal Unblocking Key. This is a unique eight-digit code specific to your SIM card. This is required when the PIN number to unlock your mobile phone is entered incorrectly 3 times. You are then given 10 attempts to enter your PUK code. If an incorrect PUK code is entered after the 10th attempt, you will block your SIM card permanently and will require a new SIM card from your mobile phone provider.
PUK codes can be obtained through the following ways - The PUK code is in your SIM card documentation Starter Pack. If you do not have this then - Please contact your phone service provider.
Your cell phone service provider can give you the PUK code once you give them your account details and they have confirmed your identity. For details to obtain the PUK code for the SIM card, please click on this link and follow my instructions.
http://www.fixya.com/support/r5705889-puk_code

These directions are for an AT and T phone, but other than that, are the same for any carrier. A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your phone carrier to unlock your SIM card. You can obtain your phone's PUK code from your carrier in one of these ways: Log in to Your account.online Use a Technical Support Chat Contact your carriers Customer Care Get Your Phone's PUK Code Online Go to the Phone/Device page. From the My Phone/Device screen, select the Unblock SIM Card link under the My Make & Model heading. The Unblock SIM screen will display your PUK code and will give you instructions for unblocking your SIM Card. Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code. Note: If you enter the wrong PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator

It's needs the unlock code. You can get the unique unlock code for your phone at -

Unlock T Mobile USA Motorola Cliq

Unlock T Mobile USA Motorola Cliq

Motorola Cliq and Motorola Blur are same Phone Only!!
Then You need Network Unlock pin means
get the Network Unlock Pin from here
Mobileunlocksolutions and Follow the instructions below and Unlock it step by step!!!

Motorola Cliq Unlocking Instructions

Warning : Do not enter any wrong unlock codes on your Motorola Cliq mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola Cliq mobile phone, your phone may get hard locked and sometimes become unusable.

1 - Switch ON your Motorola Cliq with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola Cliq is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola Cliq ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!

Motorola Cliq and Motorola Blur are same Phone Only!!
Then You need Network Unlock pin ?It locked to which Country and Network?
You can get the Network Unlock Pin from here
Mobileunlocksolutions and Follow the instructions below and Unlock it step by step!!!


Warning : Do not enter any wrong unlock codes on your Motorola Cliq mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola Cliq mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola Cliq with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola Cliq is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola Cliq ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!

When you are being prompted for the Network Unlock Pin, then that means that the phone is still locked to the original carrier. You would need to unlock the phone first before you can use your own SIM card. Unlock Motorola Cliq XT

The Motorola Cliq Mobile locked to some Network,You need to Unlock it from the Network Lock,then Only You can use the Other Network Sim Card,You can get the Unlock code at reliable cost at here
http://www.superunlockcodes.com/motorola-cliq/rs12wp9/ and Unlock it.
Note:Emergency call only,SIM error,Invalid Sim..these are network lock messages...

The Tmobile people should have helped you with that.

The Puk number depends on the pin lock on the sim, the phone will still work with a different Sim card.

To unlock the Puk code you need to call the contact number for the service provider for your Sim. Alternatively you can unlock the PUK code at a local shop for a small fee, £10 or £20 in UK.

To unlock PUK, call the company that branded your Sim card.

You need to call the phone company that sold you the phone card to unlock the phone.

PUK means "personal unlocking key" .

The PUK code is asked if you enter a wrong pin 3 times.

You need to call the phone company that released the SIM card, they can retrieve the puk code from a database for free.

In your case you need to contact your SIM card provider technical support to unlock the SIM.


The PIN and PUK are related to the SIM card, not to the phone.

If you replace the SIM card with a different one, then the phone will not ask for the PUK anymore.