Wireless Network Adapter Xbox 360 (SKWIFIX360): My xbox 360 wireless adapter won't stop flashing g...

Here is a great tutorial to Connect and troubleshhot your Xbox to a wireless network.
If you need more help post back! Thumbs and testimonial are welcome!

IF The LIGHT IS FLASHING GREEN then there is something wrong with your wireless network
Check your network settings and Retry connecting



Check the adapter's status light loadTOCNode(2, 'moreinformation'); The adapter's status light can tell you a lot about the state that the adapter is in. Here's what the different lights mean:

• Steady green light: The adapter is connected to a wireless router, gateway, or access point. The adapter is ready to use.
  
  Collapse this imageExpand this image
  
  
• Steady red light: The adapter is not recognized. Try plugging the adapter into a USB port on the front of the Xbox 360 console.
• Flashing green: The adapter is attempting to connect to a wireless network.
• Flashing red light: There is a problem. The adapter might be experiencing a hardware failure. Contact Xbox support at http://www.xbox.com/support/contact (http://www.xbox.com/support/contact) .
• No light: The adapter is not receiving power. Unplug the USB connector and plug it in again. Still no light? Try plugging the adapter into a USB port on the front of the console

may need a update....so leave your wireless hooked up and hard wire your xbox to the net to get the update.

Hi Sir


1) Remove your hard drive and/or memory units.
2) Run "Initial Setup" under the system blade.
3) Decline inserting HDD or memory unit when prompted.
4) Sync your controller and pop in a game.


Please Rate

To use the Xbox 360 Wireless Networking Adapter with Xbox Live, you must have a high-speed Internet connection (cable or DSL).


Your wireless networking adapter is designed to attach directly to the back of your Xbox 360™ console.

Refer this article http://www.xbox.com/hi-IN/support/xbox360hardware/system_setup/setup_accessories/wirelessnetworkadapter.htm#Attach

Just about any newer routers should work fine with the Xbox 360 wireless adapter. It you are worried about compatibility make sure you get the newest Xbox 360 Network adapter. It is the black one with two antennas. It will work with just about any network.

Shut off your console and unplug everything.

Connect the adapter then connect the console back together...Turn on console......Go to network configuration...Make sure u are connecting the adapter from the back!

If you are not able to achieve a connection for several attempts this means your should check warranty status for the adapter also.........If you unplugged it while the console was one you could of shocked the cable an blew the fuse.......Normally when u detach any components with a usb port u should alway make sure every thing is shut off before so.

www.xbox.com/support

i wanna say u either bought a bad wireless adapter or its looking for your wireless router

You cannot use the netgear wi-fi adapter as the xbox 360 will not be able to detect it. I suggest buying the wi-fi adapter specifically manufactured for the xbox360

sure i can help, when you run "test xbox live" where do you fail in the tests?