Non of the blinks are good but here is yours
\
\5 times, Diagnosis: White balance
failure (Not balanced) Possible causes: Video out (IC7101, 7201, 7301)
is faulty (CR, CG, CB board), CRT drive (IC309) is faulty (A board), G2
is improperly adjusted. Symptoms of the problem: No raster is
generated, CRT cathode current detection reference pulse output is
small.
also not a DIY
Please rate my help++++Thankis for using FIXYA
SOURCE: sony wega KV-36FS13 standby light blinking 5
Ur power ic inverter board is dead.
U need a new one.
1,231 views
Usually answered in minutes!
×