E120 Laser Printer: my Lexmark e120 printer doesn't printing at all, n...

Please click on the link http://bit.ly/rkP361 to see instructions on how to go about the procedure.

For additional assistance, please contact Lexmark Technical Support.

Lexmark E120 Laser Printer is compatible with Windows 7 and no additional drivers are required for both 32-bit and 64-bit versions. It installs automatically without extra software. Click here for Lexmark E120 Windows 7 compatibility details.

Hope it Helps!
CreativeTECH

Please click on the link http://bit.ly/rkP361 to see instructions on howto go about the procedure. For additional assistance,please contact Lexmark Technical Support.

hi

download the manual and look up the various control button features -- go to page 6


http://www.lexmark.com/publications/pdfs/2007/e120/ug_en.pdf

Many times horizontal lines -- esp if constant (e.g. 4 inches apart) appear-- on laser printers indicates a drum issue. NOT usually inexpensive. Sometimes one can dis-assemble part of printer and clean drum with soft cloth and therefore "buy some time"

The lexmark cartridge number is LEXMARK E120 PRINT CARTRIDGE 12015SA

takeout cartridge from printer & check if the same toner marks exist on drum then reffil your cartridge properly or change the drum if there is any scratch

You may still be able to do a printer selftest page.

Press the large button on the printer.

Look at the pages for

Toner
Imaging unit

The Imaging unit may be at end of life.

This is the drum unit and collects the waste toner.
Whilst you can just reset the drum counter (see user guide for this E120, it can lead to problems if you don;t replace the drum unit. I've seen E120 drum units packed full of waste toner, to the stage where they won't take any more, and it just spews all over the mechanism. It's a very small waste collector (but its also a very small printer, and relatively low capacity toner cartridges (1k, or 2k).

Remanufactured drum units for E120 can be found on the usual internet auction sites.

the problem is in cartridge or photoconductor, inspect them and you see

the printer needs servicing