Flatron L1750S (Silver, Black) 17" LCD Monitor: Out Of Range - what does that mean...

restart computer and pressing f8
youget advance menu
select
enable vga mode (xp)
or
low resulation mode (for 7 & 8)

when you loged in chaing resolution to 800x600 or 1024x786
restart

It could be the domestic maintenance problem keep your monitor away from moisture and other physical damage it will make your monitor perfect as new working...

log on to forums.techpowerup.com for a solution...

melrosebanjo, Your monitor will need to have some work done on it's "switch-mode-power-supply" and /or "INVERTER" circuit. After you view some vids at YOUTUBE that deal with replacing bad electrolytic filter capacitors and detecting poor quality intermittant solder joints. Search for vids of "LCD monitor repair" "LCD monitor disassembly" !! Learn what are the major causes of LCD BLACK screen problems. Learn the difference between BLACK AND BLANK screens. Read some of my other posts in my profile. then repost with additional comment here on fixya. also visit www.ccl-la.com/badcaps.htm. and www.lcdparts.com
www.badcaps.net FYI Good luck 12fixlouie

You can download the proper drivers from LG Support here. Good luck!

I installed everything from CD but still hv the problem

The black spot can stop or keep spreading, but it will never disappear or reduce in size. This is caused from a leak of liquid between layers inside the lcd panel.
Nothing to do apart changing lcd panel. Bring monitor to nearest service and check if it is worth being repaired (changing screen panel).

regards

This problem is showing when the main PCB of the monitor failed. contact the LG service provider in your area. Here is the link to get the service center info
http://www.lgservice.com/

some games need high resolution. Monitor resolution not supporting for this game.
Powersaver mode showing when the main PCB of the monitor failed. check this link to get the service center info
http://www.lgservice.com/

BLACK STRIGHT LINE CAME VERTICALLY WHAT I WANT TO DO your question is not clear. but it suonds me that 1 it is due to deflection connector is loose 2 problem in h/ output section related to hor. deflection coil assembly. good luck.