Owners manuel BC60XLT-1 30 channel 10 band radio scanner

Uniden BC60XLT 1 User Manual

Rose: All the information that you need is in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC60XLT-1om.pdf

You can find a comprehensive database of active frequencies in your area, and a lot of other useful scanning information here:
www.RadioReference.com

Bill B.
Listening in since the 60's

The best programming instructions for your scanner are in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC60XLT-1om.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

You listed your question under the BC60XLT, which is a 10-channel scanner. With 30 channels, I'm guessing that yours is actually a BC60XLT-1. To program a known frequency into it:

- Power the scanner ON.
- Press MANUAL.
- Enter the channel number that you wish to program.
- Press MANUAL again. (NOTE: Instead of entering the channel number, you can press MANUAL repeatedly to advance to the desired channel.)
- Enter the frequency, including the decimal point.
- Press E to store the information in memory.
- Repeat the above for other channels.

More detailed information can be found in the scanner operating manual, which you can download/print here:

http://www.uniden.com/pdf/BC60XLT-1om.pdf

If your scanner is a different model, pleasd let me know.

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B

There are two versions of the BC60XLT. The BC60XLT (two digit display) and the BC60XLT-1 (full display). Both of these cover 10 bands, but the two digit display model has 10 channels where the full display version has 30 channels.

The owners manual for each is listed below:
http://www.uniden.com/pdf/BC60XLTom.pdf

http://www.uniden.com/pdf/BC60XLT-1om.pdf

If you need additional help, send a reply with what assistance you need. Good luck!

http://www.fixya.com/support/p223851-uniden_bc60xlt_handheld_scanner/manual-13709

http://uniden.com/pdf/BC60XLT-1om.pdf

The BC60CXLT is a 10-channel scanner. Here is a link to the owners manual:

http://uniden.com/pdf/BC60XLTom.pdf

Bill B.

Hi - You can download the manual by clicking the link underlined in blue below:

bc60XLT

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

one of the following should be the correct one, both are for the same model, but i believe there may have been submodels

http://www.uniden.com/pdf/bc60XLTom.pdf

http://www.racescanners.com/~draley/ScannerManuals/BC60XLT-1om.pdf