Callback Hi we are using a Nortel T7208 system. How can we leave a notification on another phone in the office to let them know they need to call another person back?

This is usually programmed as one of the 'soft' buttons down the right hand side of the device - subject to the programming of your phone / and the system.

Usually the T7208 is connected to the BCM range of PBX systems - in which case, to transfer a call, you'd use Feature 70. You could, of course, program this into one of the buttons yourself, so you only have to press one button to do so.

Hope this is of use to you. :)

No, the nortel phones you have are digital. Cisco is an IP system (not very good either)

The Nortel T7208 set is propriatary which requires an MICS, CICS, or a BCM system to make it work.

I dial my number and press ** when the VM picks up, then it should run you through the regular login process.

Hi there...

OK, the Nortel T7208 set works only on a Nortel system.
It has only one line cord plugged into it, cause the telephone system can be programmed for more telephone lines and features from the system.

If you want just a home (analog) telephone service; look at Aastra/ Telematrix/ there are others - 2 line sets.

ONLY buy this Nortel set is you have a Norstar system. Otherwise the set will not work for you. It needs a system to run off.

Good luck in your search!

to change the main greeting you need to get into admin programing F983 your also going to need a 7310 or 7324 or a T7316. You have to use the buttons under the LCD screen to navigate after getting into admin press AA
Press GRTG
Press GRTG again
and usually 1 is set for day
and 2 is set for night
press 1 then ok
Press REC.
Hope this helps

Hi

I buy my T7208's from:
http://www.exteradirect.co.uk/search.php?mode=basic&search=t7208

They are half the price of BT and work fine with both my BCM200 & BCM400 systems. Give them a call if you are in any doubt.

K

I am trying to changed my phone name as the person it belonged to is no longer here now.

need service call