How to reset a techomarine chronograph watch at 12:00 position

To reset the chronograph hands on an Accurist 7344 watch, you will need to follow these steps:

1. Pull out the crown to the second click (time-setting position)
2. Press and hold the top button (located at 2 o'clock) until the chronograph seconds hand returns to the 12 o'clock position.
3. Release the button and then press and hold the bottom button (located at 4 o'clock) until the chronograph minutes hand returns to the 12 o'clock position.
4. Release the button and push the crown back in to the normal position.

It's important to note that these steps may vary depending on the specific model of your Accurist 7344 watch. If these steps don't work, refer to the manual or contact the manufacturer for more detailed instructions. Additionally, if the chronograph hands don't move at all, check the battery and make sure it's properly inserted and the watch is working properly after replacing it, if not, contact Accurist customer service for more assistance.

i don't know about on line instruction.
but i could help you ....
there is two position for crown 1 and 2.
bring crown on position 2 and turn crown clockwise to change TIME, DAY & DATE.

bring crown position 1, and turn crown counterclockwise to change DATE.

your watch has Chronograph / Stop watch.
use that please press right TOP button chronograph will START, press again Chronograph will STOP.

Press bottom button to RESET Chronograph.

hope it will help

pull crown out to second position then press start button till it goes to 12 then push crown back in

Easy, go to youtube.com and watch the video on How to.

you can find an exper in the local shop where you buy the product and they will give you specific service

for your questions about your product.

In addition, i like to play world of warcraft. there is a reliable website for

all players to get cheap wow gold with the lowest price wihit in

10 minutes' fast delivery and you also can enjoy first class service

for your login.

Pull out the crown and use either a combination or one of the cronograph buttons, this will allow you to adjust the hand positions

The trick is to pull out the stem 2 times and use the plugers to adjust each of the dials. Some watches have 3 dials and you have to pull out the crown 1 time or click and use the plungers or buttons to adjust the other dials.

Dennis,
"Chronograph" is watch terminology for 'stop-watch'.
There are 3 small dials on the watch.  The main dial has a minute hand and an hour hand.  The big second hand on the main dial is not for the main time of the watch.  It is for measuring seconds for the stopwatch.
The 2 small dials at 10 o'clock and 2 o'clock will give you minutes and 1/10 of a seconds.  
There are 2 buttons on the side of the watch. Top Button:  Start/Stop Bottom Button: Reset
To set the chronograph to its default position, you would pull out the stem to the first position and push the buttons.  Also, pull the stem out further to the 2nd position and push the buttons.

fake

1. Pull out the time set mode button.
2. Press the upper right button repeatedly until the sweep hand makes it back to 00/60.
3. Press the time set button back into normal position.