KDC-MP235 CD Player: how to change my subwoofer on my kenwood cd player...

Hi there,

You could try reading my tip on repairing Kenwood faceplates.

How to repair Kenwood Faceplate


Cheers,

Here is a link that will let you download a users manual for your kenwood
http://www.usersmanualguide.com/kenwood/car_electronics/kdc-233

Your code number is 5227 (KCAR) As set by Kenwood unless changed by the purchaser. If different then check the link below for excellent tip?
As posted by robotek (Below), Regards.
http://www.fixya.com/support/r538828-security_unlock_code_kenwood_most_models

use the blue/white wire ( amp remote turn on) instead of the blue (antenna remote turn on).

check for shorts in your speaker wiring..

http://inform3.kenwoodusa.com/manuals/KDC-MP2035.pdf : Manual

No "LOUD" per se, however selectable gains at differet frequency ranges will give you the same effest. Please see manual to adjust properly.

you have to be in standby mode, thats the key, i had the same problem, just go to "demo on" and change it to "demo off"

hi, KDC-MP2028 is the model, what you need is the serial number printed on a tag at the back of the stereo

This Ebay auction 170150626863 will remove the code for 40.00 including shipping, or you can contact Kenwood at 1-800-KENWOOD (536-9663).
Good Luck.
Leadispenser

take a pen and press the reset button ...it's a tiny little button next to the button that takes off the faceplate...