Model ;cannon ir400. problem; e030error in 10

Hi. that error indicates there is a problem with the fixing motor.

Most likely it's time to replace the drum unit. Mfr Part #: Canon 1342A003AA, GPR-2, F43-6701-700. Those drum units only last 55,000 copies and then the copy quality starts to degrade.

my cannon ir400 xerox machine is on but no working power supply is full but not run machine

Check fixing rollers

inside the front cover on the left side

Hello sir; The error code you display 803 & 805 could be come from same problem, both all are composite board 24 volt supply problem, replace composite board will take care this problem. good luck.

this error is related to exposure lamp , does the the two end of the lamp is blackened. Otherwise the exposure lamp needs replacement

dear sir, I have ir400 copier. please help me to solve the error no. e051. thanks,
regards

power cycle the copier, press the 'print/if' or 'options' button, wait.... "do you want to enter service mode" YES, wait.... scroll down, "clear server", "are you sure?" YES, wait... DONE

the "wait..."'s above can be 2-3 min.
the "do you want to enter service mode" is only displayed for about 10 seconds so watch carefully, if you miss it you have to start over.

I want user manual for cannon imagerunner 400 / 330 series