Z22 Handheld: what is the price of palm Z22 handheld...

Hello AnyMoose:

I have an entire web page covering many issues with the Palm Z22, and data connectivity is one of them. The ANSWER above of the CompanionLink software is one which I had not seen until now, and I will add it to all the resources listed on my page...

Other solutions include the software from ACEECA, the PALM Z22 connection software from Hewlett Packard, in conjunction with the Virtual Windows XP software, with technical notes from USERS, all listed on my web page...

http://kidbots.com/WEBADD/Z22_PALM_PILOT/Z22_PALM_PILOT.html

Hopefully, once you read over all the data, you will get all the data to- and from- your Palm Z22...

As well, tips and suggestions are included on the Battery problems, the touch screen issues, and other quirks with the Z22 as it ages!

hope this helps...

good luck

robin dusty graves
Z22 PALM PILOT

If you've set a password on your handheld, any hard reset will automatically become a Factory Reset. With this method, you'll enter a password and then perform a hard reset.

1. On your handheld, launch the Prefs application. Under General, select Security.
2. If the Password box says "Unassigned," tap the box and create a password for your handheld.
3. Once the password has been set, remove the stylus. Disconnect your handheld from the AC charger, if connected.
4. On your handheld, hold down the Power button.
5. While holding down the Power button, use the stylus to press the RESET button on the back of your handheld.
6. While still holding Power button, the screen will show the Palm logo and a progress bar. Then the circular Palm Powered logo will appear. Release the power button when you see the Palm Powered logo.
   Keep holding the Power button during this screen. When you see this screen, you can release the Power button.
7. A message will appear warning that you are about to erase all the data stored on your smartphone. Press UP.
8. You'll see a series of Palm logo screens, then a prompt to tap onscreen targets. The Factory Reset is complete.

Sometimes if you plug them in to the hot sync cable they will charge. This works for my TX however I am not sure about the Z22. I am including a link to the palm free chat service. Normal 0 Scroll to the bottom of the page and you will see a Palm Chat. From there click on the link that says Chat Now and follow the online prompts. Best wishes...I hope this will help you.
They can answer that questions for you there. I have used the free chat service and it worked great for me. Best wishes.

http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/supportservices/page_en.html

HI,
Follow this link to get your manual;

http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/downloads/page_en.html

Get a fresh copy of HotSync software at http://palmone.r3h.net/downloads.palm.com/PalmDesktopWin62.exe
After new installation create a new profile
When it sync it will from handheld to the computer.
Good Luck

Yes, replacements can be purchased online, here is a link to the google search. Hope this helps.

http://www.google.com/products?q=Palm+Z22+Handheld+battery&rls=com.microsoft:*&oe=UTF-8&um=1&ie=UTF-8&ei=J3e2SeKxMZ-atweRv9G_CQ&sa=X&oi=product_result_group&resnum=4&ct=title

thanks,
David

Hi here are the steps but ensure to backup data before you make a hard reset
Press and hold the power button
While holding the power button, use the tip of the stylus (or a similar object without a sharp tip) to gently press and release the reset button inside the hole on the back of your handheld.
Wait for the Palm Powered™logo to appear, and then release the power button.
When you see the message that warns you about erasing all of the info on your handheld, do one of the following:• Press Up on the 5-way navigator to finish the reset and show the touchscreen.• Press any other button to do a soft reset.
When prompted, tap to align the screen, and then select the language you want to use on your handheld. A screen appears showing the Palm logo and a progress bar.
When the Welcome screenappears, the hard reset iscomplete
Hope this helps and do let me know

And there won't be. Please go live chat and I can explain

I went into the HotSync Manager and changed the settings to Desktop overwrites handheld. That did the trick!

yes it is. if you have the installations cd for you zire handheld and the installation cd for your palm z22 handheld and have already installed them on one computer then you can just go up to the file tab on the top, click on it, and got to export, then choose what you want to go on to the new handheld and just click export the palm z22.