Caller ID Display

Unplug the line cord. While holding down the * and # keys, plug the line cord back in. Release the * and # keys.

Follow the directions on-screen, which will test all display modes, buttons, and sounds for both red and green colored LEDs.

If the feature button continues to flash, press it and then lift the handset and hang up.

you need to subscribe to Caller Id from the phone company! If you already have it, it should work, otherwise I would check with your NEC contractor.

Try adjusting the display by using the arrow keys on the bottom right of the phone. The phone must be idle to do this.

Caller id would have to be truned on, in system programming, as long as the caller id card is installed. If it works for the corded phones and not the cordless phones than, the analog caller id feature needs to be programmed. check out ldtsnj.com

when the light is lit it allows hansdfree use of your phone.

the simple answer is no

depends on the type pf system. Do you have a coib installed in the system? Is caller id setup or programmed? If there is no mif card in the switch you cannot save caller id info. It only shows up when the phone rings and while on the call. There should be a directory key that you can price to scroll through the numbers if everything above is correct. ldtsnj.com

You should be able to adjust LCD contrast when phone is idle, just use the up/down arrow button to adjust it (don't go off-hook). If you have background music set, the above procedure will adjust the music volume instead. You can turn Background music on and off by pressing <Feature>,2,6 when your phone is idle. Alternatively, you may press <Speaker> 6,0,2 and then use the UP/Down arrow key to adjust LCD contrast.

Your system needs to have a mif-m card and kmm chip installed and all programming setup in order to scroll through the caller id. If this is all setup you can hit the directory button and than use the arrow buttons under the display to scroll. ldtsnj.com

You need a mif-m card and kmm chip installed in your system in order for this feature to work. ldtsnj.com