An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
Re: dvd player not showing color
You are only having porblem with your color system. if you are using a multi system DVD player then see if it is properly selected to your region. in USA it should be NTSC 3.59, if you're in Europe it should be PAL. if you're using your DVD via a DSP or audio systems, check also the color system of the amplifier, it should be adjusted to your color system.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1) Remove any DVD that may be inside 2) Press AND Hold Stop Button (on front of Player) for 5 or more seconds 3) All Done - This will have reset player back to Interlaced Mode and you can now see your DVD!
I have a Sanyo Dvd/vhs player and I recentlty went to dish network instead of cable and I do not know how to get the player to work now so I can watch movies that I have rented. Can you tell me how to use the remote to watch movies.
I just had the same problem with the same model but I was able to figure it out after a while.
From the remote control:
Scroll left or right to the PREFERNCES menu.
Scroll down to the bottom until DEFAULT is highlighted.
HIt the PLAY button in the remote while RESTORE or RESET is highlighted.
The DVD player was reset back to factory settings within 10 seconds.