GE Webcam Issue Chic

Hi bpace33

GENERAL ELECTRIC MINICAM PRO HO98756 WINDOWS 7 WEBCAM DRIVER

You can download the Windows 7 Drivers for your webcam by clicking on the link below and scrolling to the lower half of the page. If you select the "save" download option and select "desktop" as the download destination, you can download the setup files and save them somwehere for if you should ever need to reinstall the drivers again at some point in the future.

http://www.jascoproducts.com/support/software-downloads-win7.asp

A PDF Manual is also available for download for this webcam
.
Please note that, for some webcams, it is better to install the drivers and capture software first and then connect the camera afterwards.

If you have previously installed the drivers and software with the camera connected, disconnect the webcam > uninstall all components of the webcam drivers and software > restart the computer > reinstall the webcam drivers and software > restart the computer > reconnect the webcam > Computer > right click on the camera icon at the bottom of the window (scroll down if necessary)> Send To > Desktop (create shortcut) > double click on the new desktop webcam icon.

I hope this helps.

If this Answer goes some way towards helping to resolve your Query, Problem or Fault, please take the time to Rate it. Doing so helps Solution Providers, like me, better understand the needs and the point of view of Askers, like you, and guides us in exploring the best ways to provide the most comprehensive, useful and high quality Responses and Solutions we can. If you need further help, please do not hesitate to post another Question or add a Comment to this Question.
Thanks for using FixYa.

1st You download Webcam Driver.
I have a General Electric
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

DON'T WORRY YOU CAN DOWNLOAD THE DRIVERS ANY WHERE ON INTERNET ....HERE IS AN LINK TO YOUR DRIVER
General Electric or GE Driver Downloads for computer accessories are here: http://www.jascoproducts.com/support/software-downloads.asp

Scroll down to PC Cams.

If you are unable to find the drive here, try http://www.driverguide.com

http://www.jascoproducts.com/support/software-downloads.asp#pccams

http://www.jascoproducts.com/support/download-files/98656.zip

here is the drivers for general electric web cam

i need driver GE easycam pro model HO98064

you have to install the software driver of your webcam HO98063 on windows vista in order to work properly.......otherwise it will not work in windows vista........try this ......it will work 100%....i am a software engineer.....and i have experience in it......thats why i am suggesting you this idea..........

i did some research on GE's web site and found no evidence at all that this model supports webcam function. Not alot of digital cameras do anymore-may be cheaper and easier to just buy a dedicated web cam and you also get the right software included

JASCO (GE) makes that product: http://www.jascoproducts.com/support/software-downloads.asp
Scroll down to PC Cams.

Here are some "Driver" links below.. www.jascoproducts.com/support/ software-downloads.asp multimedia.ftpk.net/download-driver-of-general- electric-minicam-model-no-98067-logiciels.html www.driverfiles.net/Cameras/Chicony-Electronics/ GE-HO98064/download/page,show,17174,40,17,.html