Same problem here. I checked that thermal fuse and its got power all the way through. Im thinking it may be a touchpad problem cos i changed the control board and still same thing.
Same problem here. I checked that thermal fuse and its got power all the way through. Im thinking it may be a touchpad problem cos i changed the control board and still same thing.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Lift tab to open the rinse aid reservoir and add -3 tablespoon max, do not overfill. "qUid rinse aid ... Cancelling a cycle I Reset the dishwasher. 0 LEDs flashing ...
We view your purchase as the beginning of a relationship. ... Store dishwasherdetergent and rinse agents .... This cycle allows you to program your preferred.
I have same problem. I can't find the Troubleshooting diagnostic instructions. These are usually hidden somewhere on the washer. Do you know where they are?
sounds as if your having a problem with the latch assemblt, not recognizing the door is being closed, so its waiting fot he door switch to be activated
I have this same kitchenaid model. It would not start after selecting the wash cycle and pressing start. The light would blink as if the door was open. I did the reset by pushing the sani-rinse, heat dry, sani-rinse, heat-dry and closing the door. You can hear something going on inside. After that stopped (about 3 minutes). I was able to select the wash cycle, press the start, close the door, and it started. Good luck!
Same problem here. I checked that thermal fuse and its got power all the way through. Im thinking it may be a touchpad problem cos i changed the control board and still same thing.
Normal button constantly flashes.
×