Hi i my wlan of paradyne router is not working

Go to the website and down load the user manual and will have the default U/N Password

Try admin and admin without the capital A.
Have fun :)

login to your router page with the help of your default gateway in that you can find the option called security or wireless security in that you can find your password

Hi Samsungvt!

You will have to access the Web Interface of the Paradyne Router to reset it to Factory Defaults.

First, connect your PC to the Paradyne Router. Check your IP address is in the range 192.168.1.xx (xx = any number from 1-254). Open your web browser, type 192.168.1.1 then press enter. Enter the default username and password (shown below) to access the router's web interface. On the left pane, click Erase and Reboot; this will reset the router to factory default.

Default IP address is 192.168.1.1
Default Username and Password: root

Let me know if there's anything else...

Anthony

Try this instead Set static IP on your router like 192.168.1.60 (depend on your gateway) and DNS1 = 2.2.2.2 , DNS2 2.2.2.3

Open your web browser (Internet Explorer, Netscape, Firefox,etc),
Enter 192.168.1.1 into the address window, and hit the Enter key.
The default user name is Admin
and the password is Admin.
Both are
case-sensitive.
Be sure that your ip and subnet is in the same range so that you can access the router ip 192.168.1.1
Normally yours should be 192.168.1.x where x is 2 to 254
and the subnet 255.255.255.0
I am enclosing the manual for your router.

http://rapidshare.com/files/342793411/6388-A2-GB20-00.pdf.html

You can use this to configure as per your need.
Regards
Uttam

Are yo trying to connect the PS3 to the wireless network.
You will need to change some settings on the router.
Click Here to know more about the router and networks

Press the reset button behind the modem for about 10 seconds.
http://www.zhone.com/support/manuals/router_manuals
http://www.zhone.com/support/downloads/cpe/6388-A1/

first write 192.168.1.1 on address bar a login window will apear write user name and password admin

On your connection LAN icon that normally sits at the bottem right hand corner, Right Click on it and select "Repair"

That should do the trick.