How do I fold my 2006 dreamer design double stroller

A copy of the user manual can be found online

Hi
We would recommend you contact Chicco for assistance
http://www.chicco.co.uk/

do you still need this? First un-velcro the bottom storage basket in the back, by the back wheels, take off all the wheels ( but its not necessary, but it does allow it to fold more compactly) Then undo the front thumb tabs where the front wheel is. (mine has 2) This should allow it to collapse forward. Last fold it in half, bringing the front wheel prongs to the handle bar. Sometimes the fabric gets caught a little, so just make sure its not catching at the place where it folds. Here is the owners manual too,,,

http://www.joggingstroller.com/assets/product_files/instructions/Dream-Design/DreamDesign_Ditto_manual.pdf

Try ebay they have loads of spare parts for all sorts of prams

The older models unhook at the front wheel. Right behind where the wheel connects is a black peice that you can release and the T frame will separate. Just push the top of the stroller back and then you can also fold it onto itself. You may need to un-velco the storage basket front tabs to release the frame. Feel free to contact me directly if you need further assistance.

The older model joggers fold by separating the frame at the front wheel. Look behind the front wheel and you will see a black connection piece that disconnects the T frame. Release it and pull up/push back on the bar that goes between the seats. Once it goes flat, you can also fold this part onto itself. Please feel free to contact me if you need further guidance

The older model joggers fold by separating the frame at the front wheel. Look behind the front wheel and you will see a black connection piece that disconnects the T frame. Release it and pull up/push back on the bar that goes between the seats. Once it goes flat, you can also fold this part onto itself. Please feel free to contact me if you need further guidance

i have both the double and single dreamer design stroller and on both - there is a black pull thingie ... if you put your hands on the handbar and then follow down the frame (along the back side of the seat). You will feel it - as it is kinda hard to see. Once you pull this on both sides, push down on the handbar - towards the ground. The stroller will then fold down and in half.

Not sure how different this one is to ours but we have an older Dreamer Design double stroller and down by the front wheel there are two black plastic clips that you pull upwards while at the same time pushing two small depressable "buttons" that are in line with the main bars coming down towards the front wheel... once that's done you lift and push backwards at the same time, the whole stroller frame will move backwards (oh brake has to be on) and then once those main bars are free you can pull the frame towards you and then double it over back on itself...the rear wheels pull out by pushing the centre button and pulling on the wheel and they you're able to put it just about anywhere...hope that helps...Rob

Hi, I have brand new soft parts including a new under basket for a ditto dreamer design double. My stroller died before I could put the replacement on and I don't know what to do with it. Let me know if your interested.