I have both a WRT54G v2.2 and a WRT54GS v6. Same Power Specs?

just fixed one yesterday.
the power pack was no good.AC wall wart,
power green LED blinked endless. and the white logo, LED is dead..
a new pack fixed it.
also the wrong pack used, ! do not mix them up. oops.
first year 54G, v1 uses 5vdc pack.
at v2, and up all want to 12vdc pack,
bottom sticker on above failed was v6.
you said recognized, does that mean the 4 rear Ethernet wired jacks are dead, or just wifi dead.?
first the ethernet ports must work, or wifi is doomed.

You could install the Linksys WRT54GS without any CD.

You could use the Linksys EasyLink Advisor to scan your network for the Linksys WRT54GS.

The Default IP-address is 192.168.1.1 so you should be able to connect to the Linksys with your Webbrowser when you do a factory reset of the Linksys.

This is High Quality original LINKSYS AC Adapter Charger

Input Voltage: 100V-240VAC (50-60Hz)
Output Voltage: 12v1a

Model: AD12V/1A-SW

DC Plus Dimension: 5.0mmX2.1mm

Compatible Models:

WAG300N

WRT54G

WRT54GS

WRT300N

Linksys Routers

Hello hariram2608, click here:linksys-wrt54g-power-ac-adapter/q/sellerid/19238591/loc/111/211845231.html">http://www.buy.com/prod/cisco-linksys-wrt54g-power-ac-adapter/q/sellerid/19238591/loc/111/211845231.html This is just one website to look at, what important is that it shows you what type of "Power Adapter" you will need! Thanks for using Fix' Ya, paul7of9

Hi,

Upto 1.5 mts is OK and u require a cross over cable to get an connection.

You can press the reset button on the back for a minute and it will reset the router back to default.

My Linksys WRT160N keeps disconnecting also, it just started a few weeks ago and I do not have an answer yet, but I will try to keep this site posted.

Is this an ISDN modem?

Generally: Netopia Ethernet out -> Linksys WAN port with a standard ethernet cable.
(Not the yellow LAN ports! - They are for your computers/printers.)

Try to leave of air for an hour, untill its cold, then reconect it, if the time untill it quit conecting is consitrly longer, your Linksys is dying.
/Teis

You more than likely do not need an installation CD to get this router running. For what it's worth, you can download specs, firmware upgrades, etc from the following link:

http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859761879&packedargs=sku%3DWRT54GS&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=6187945678B01&displaypage=download#versiondetail

Hope this helps.