I have a Philips Magnavox tp3273c101 with a blue screen and a message in spanish, but i dont speak spanish. help

Since you did not provide the model number, unfortunately I cannot give you the exact information, but check this page out and see if it has information that will be useful for you:


LAX MAX NEW GENERATION LI S63 Manuals

Hello
you can chage the display language as follos:-

Press MENU to see the menu.

Press VOL+ or VOL- to highlight

(Feature).

Press CH- to highlight Language.

Press VOL+ or VOL- to select

English

French or Espanol (Spanish).

Press M NU repeatedly to remove

the menu from the screen or the menu

will automatically disappear within a

few seconds if no buttons are pressed
on the remote control.
OK.

Hello linda, hi, I dont think the remote or manual can help the color issue problem, the tv needs to be looked at by a qualified technician. If the TV is a tube type, there are magnets on the neck that needs alignment, this alignment is done while the TV is ON. so high voltage risk are likely. keep out and call service.

this sounds like a manufacturer defect I have found no precedence for this problem anywhere else so I cant imagine the company even giving out an answer to such a rarity of a problem I would suggest contacting the manufacturer and seeing about having them replace it


Robb

do you read spanish ?

if not ( go to dictionary.com) and translate the words

if you do speak spanish- go to "Settings" ---> "Phone Settings" -->> "Languange" and choose english.

I dont Speak Spanish

Hope this helps

thanks

you have to set up the convergence using the on screen pattern generator.

Magnavox is a sub division of Philips inc. the manual can be found here: http://www.p4c.philips.com/files/1/19md358b_f7/19md358b_f7_pss_aen.pdf

I dont know if they sell them but Philips has parts distrubitor

phone # 1-800-432-8542
also try 1-800-638-3328

good luck, I dont expcet any of that is cheap...

I don't know the exact TV, but Magnavox usually have an item or two items in the menu system where the "Magnavox" and also the "blue screen of death" can be disabled. Look in your manual.
I'd suggest the reason it appears is temporary loss of signal from the antenna, set top box, cable system or whatever it is you receive your TV programming via. I don't have an answer as to why it occurs watching video, but turning off the logo and blue screen should help. If it still occurs, it's time for professional intervention!

ok i think it might be the picture tube im not sure but if u dont trust me call the company for assisants!