Changed ink and now the printer wont print

Make sure there is nothing covering the jets on the cartridge.
check and try to reset the cartridge.......


If you need any technical help on printer then you can reach at here

From what i understand with the kyocera colour printers theres a menu option to print black as black opposed to a combination of the colours. I'm not too sure where it is, however it sounds like the kodak is very simular and is using the colours to create black instead of using the blank ink cartrage.

Hi there.
It could be the chip in the cartridge... faulty for printing?
Settings in the printing process?
Iceman.

Hi

1. Make sure that you have removed the plastic cover from the cartridge nozzle .
2. check if your black ink cartridge is full - put the nuzzle on the tip of you finger if it leaves ink drop then it is full and should print ok , if it didn't leave ink on your finger then it is dry and you should buy new cartridge .

hope it helps

If you aren't currently, use the cartridge that the printer's manual says is for photos. Photo paper requires a different kind of ink.

Have you tried the printer set up menu?
Run the "clear nozzel" test.
Run the "test page" test.
If these tests fail to solve your issue, then it is probably the cartridges.
Hope this helps
G

I called Kodak and they are sending me a new printer head at no charge! Can't get any better then that. Man I talked to was very nice, knowledgeable and polite.

pictures are not clear even after installing new ink cartridge and cleaning print head

You will need a new printhead call 1.800.421.6699 to request one. Please rate. Thanks!

thank you vry much!