Press and hold SEL until menu appears
Using the scan button (FWD/REV), select Clock H
Using the volume knob/button, set the value
Using the scan button (FWD/REV), select Clock M
Using the volume knob/button, set the value
Press SEL to save and exit
Press and hold SEL button until PSM (personal settings mode) items appear such as: clock H (hour) or clock m (minute) or anything else.
Using the SSM button (up or down) select Clock H
Using the volume knob/button, set the value
Using the SSM button (up or down), select Clock M
Using the volume knob/button, set the value
Press SEL to save and exit.
SOURCE: clock set
To set the time press and hold the select button in the centre of the volume dial until the word demo appears on the screen. From here you can change the time by pressing the next track >>I button to select clock h. Use the use the volume dial to select the hour. Use the next track button >>I to select clock m and use volume dial to set the minute. This same procedure can be used to change the dimmer on/off, demo on/off and the amp gain. Have a play around. Hope thjis helped.
SOURCE: Setting Clock for JVC-KD-G420
i LOST MY MANUAL FOR MY JVC KD-G420 STEREO I NEED TO RESET MY CLOCK. DOES ANYONE HAVE THE ANSWER
SOURCE: setting clock on jvc radio
Hey here is an instruction page for your clock.
http://resources.jvc.com/Resources/00/01/13/LVT1775-001B.pdf
SOURCE: i need to set the clock on my jvc kd-g340 car stereo
make sure radio is on and you press and hold sel (select) button
when you see demo release the select button(you might see other option if you have access the menu options). then press the forward button until you see clock h (hour). to adjust turn volume knob. then press the fast forward button again to get clock m (minute) and use volume knob again to adjust minutes. once you are done make sure to press select again to save the time.
These are generic instructions for a JVC car stereo:
1. 1. Hold "SEL" button
2. 2. Select CLOCK H or CLOCK M with the fast forward button or
fast backward button.
3. 3. Adjust item with wheel
4. 4. Finish by clicking on "SEL" button
5.
Manual can be downloaded at:
http://support.jvc.com/consumer/product.jsp?categoryId=CATG0004&archive=true
585 views
Usually answered in minutes!
×