The x button on the remote control of my ps2 does not work. i tried using another remote control, but the same occurs. what can i do fix this problem?

Observe these instructions to connect your wireless Logitech PS2 controller to the receiver :-

1. Verify that the PlayStation 2 console is connected to the receiver.
2. Switch on the PlayStation 2.
3. Replace the controller's batteries.
4. For roughly 2 seconds, press and hold the receiver's sync button.
5. Press and hold the controller's X button for 5 seconds.
6. To verify a connection to the receiver, the controller LED should flash rapidly.

Try the following if the controller won't connect :-

• Double-check the placement of the batteries.
• Experiment with various batteries.
• Bring the controller up to eye level with the receiver. Try rebooting your PlayStation 2.

Try getting help from Logitech customer service if you're still having issues attaching the controller .

Here are some extra pointers :-

• Verify that no other controller is currently using the receiver.
• Verify that no other wireless devices are present that could interfere with the connection.
• You might need to utilise an adaptor to connect the receiver if you're using a PS2 Slim.

New tv's don't use dead channels like 00 anymore for there inputs.. They use sources to change from different inputs.. Make sure you have your ps2 hooked up into input plugs on the tv and then turn it on the ps2 then look on the new controller for the tv & find a button saying source .. Press that until you see your ps2 on the screen. If not check your connections try again.

Today I bought the Phillips SRU5107/27 Universal Remote Control and I was able to programmed my intec PS2 Remote Control. This control has the "learn" feature and you can program every single button and feature of your Intec.

you use the game controller from the PS2 to play a DVD or if you have a DVD remote specifically for the PS2, you can use that instead of the game controller.
hope this helps ;p

One of two things may be occurring. The first is the remote address on the remote may have changed some how. The way to reset it is to press and hold the SAT button on the top left side of the remote until all lights across the top illuminate. Now key in 01 and press the pound sign on the bottom right of the remote. The SAT button will flash three times. Now try to operate the system using the remote. If you aren't sucessful your remote may be bad or the remote address of the receiver may not be what initially was recorded. Please let me know if you are unsuccessful or sucessful. Thanks for using Fix Ya.

One of two things may be occurring. The first is the remote address on the remote may have changed some how. The way to reset it is to press and hold the SAT button on the top left side of the remote until all lights across the top illuminate. Now key in 01 and press the pound sign on the bottom right of the remote. The SAT button will flash three times. Now try to operate the system using the remote. If you aren't sucessful your remote may be bad or the remote address of the receiver may not be what initially was recorded. Please let me know if you are unsuccessful or sucessful. Thanks for using Fix Ya.

Try them on another playstation 2. If the same problem occurs, then the controllers probably or broken. Did it get banged around a lot? Is the cord ruptured or something?
Hopes this helps!

Removed accumulated dust sticking on the board were the buttons touches.use cotton balls with alcohol or use clean damp cloth.If nothing's happen check the cord I'm sure it is twisted badly, open your ps2 use this controller and try to twist back the twisted cord if it stopped sometimes when your twisting it then you have to replaced the cord(make sure that your using the original ps2 controller not imitation)pls. rate

u get reciver with it now put riciver in ps2 a port and turn it on press start button in i r controller and enjoy the GAME

I would say either give the controlers to a specialist to take it apart or buy new controlers because mabye somthing inside is bugging up the controlers recive port