How do i remove or reset the parental lock code on an RCA TV RCA model 20F514TD?
If you forget your password you can reset it.
Simultaneously press the VOL+ on the remote and
the CH+ button on the front of the TV. The display
will appear for you to enter your new password.
HERE is the manual that I got all of my info from
which is a similar model that will have same controls
×
You need to reset it give me 2 mins I will post the solution here
Here I report the original post from techman:
"Most RCA and GE TV sets use a four digit code to control the v-chip.
The code reset procedure is different depending on the model. Try each
method until you find one that works:
Hold
down MENU on the remote and VOLUME DOWN on the TV it?s self at the same
time for at least 4 seconds. The set won't say so, but the lock will be
unlocked
Hold down the 0 on the remote and the VOLUME DOWN
buttons on the TV its self at the same time for at least 4 seconds. The
set won't say so, but the lock will be unlocked
Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds.
Hold down GO BACK on the remote and MENU on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT on the front of the TV and the MENU button on the remote at the same time for at least 4 seconds.
Depending
on the model, one of the methods should unlock the V-chip. Now, if
desired, you can change the settings on the V-chip by going to the MENU
and going to PARENTAL CONTROLS, or on some sets, going to MENU and then
going to TV SETUP, then to V-CHIP SET."
You need the original remote to do procedure above, if you lost the remote you can buy a replacement here
×
[1] From the PARENTAL CONTROL menu, press the up or down arrow to highlight
Lock Fr. Panel.
[2] Press the right or left arrow to turn on (box has check mark) or off (box doesn't
have check mark) front panel lock.
OK.
714 views
Usually answered in minutes!
×