Question about HP Compaq ProLiant ML530 Server

How to enter in bios to boot change sequence in ProLiant ML 530

How to enter in bios to boot change sequence in ProLiant ML530

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Teacher:

An expert who has written 2 tips or uploaded 1 video tip.
Contributor
32 Answers

Press F10 during post boot if you have smartstart installed in the partition. If not, you need to boot from SmartStart CD.

Posted on Jun 01, 2010

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

How to boot from CD hp proliant ML 110 G6 sever

Check BIOS for boot sequence. CD-ROM / DVD should be 1st.

Jul 20, 2012 | HP ProLiant ML110 Server

1 Answer

Hi i have a srv compaq proliant ml 530 when i want to install win 2003 there is an error shown in blue page that means ( there is no hard disk ....) what should i do ? or only i should install...

i want to install winxp on srv they give me error win cannot detect detect what can i do

Apr 13, 2011 | HP Compaq ProLiant ML530 Server

1 Answer

How we enter the hp compaq Ml-350 server bios setting

At startup before OS is loaded you will be prompted to press F8 to enter system setup at this point press F8. This message only last a few second. If you didn't get it the first time reboot the system and pay attention to get this message.

May 24, 2010 | HP Compaq ProLiant ML530 Server

1 Answer

BIOS SETTINGS

Usually you can enter on your BIOS Settings by pressing F2 or F11 on some PCs. When the computer boots, before it enters into your operatng system, press F2 or F11. Please rate if this would help you.

Feb 04, 2010 | HP Compaq ProLiant ML530 Server

1 Answer

SCSI Devices not detected when posting ML530 Server.....

Hello,

To get to the BIOS for your server, press F10 at start-up. This should get you there to verify if settings are detecting SCSI devices. If they are there, you may have to reinstall the SCSI controller drivers. Good Luck.

Jan 30, 2009 | HP Compaq ProLiant ML530 Server

1 Answer

Problem with scsi driver proliant ml 370 for NT4

Are you attempting to boot from the Windows CD?

If you are booting the server from a Windows installation disk and it is unable to detect the hard drive, this typically means the following things.
You need to provide the driver for the RAID controller of the server (this can vary, depending on the version of the ML370 e.g. G4/G5)
If it still cannot detect the hard drive after providing the driver for the RAID controller or if there is not a driver available for NT4, it may not support the controller.
In this case you can remove the RAID set by entering the RAID setup (could be LSI or adaptec). NOTE THIS WILL DESTROY ALL DATA ON THE DISKS THAT ARE A PART OF THIS RAID SET.

Dec 26, 2008 | HP Compaq ProLiant ML530 Server

1 Answer

Boot Sequence

f5 or f6 keys

Dec 04, 2008 | HP xw6600 Workstation with 650W 80 PLUS...

2 Answers

HP Proliant ML370 Server: Very Urgent Please

Open the system cover and check whether any LEDs showing amber or Red colour

Oct 29, 2008 | HP Compaq ProLiant ML530 Server

2 Answers

Ml530

There are many configuration settings, although i personally would hunt down an SCSI hard disk, many will fit from many other models just like IDE ones

Mar 24, 2008 | Compaq ProLiant ML530 Server

3 Answers

ML530 Startup

Check your Hardware configuration. This usually happens when you tell the system BIOS that you have for example, a second floppy or Hard Drive, when you do not. So it stops and asks you what to do next.

Hope that helps.

Eddyfix

Oct 12, 2007 | HP Compaq ProLiant ML530 Server