WS-65511 65 in. Rear Projection Television: error code 12...

When it shuts down have you tried accessing the self diagnosis feature to retreve the error code?If so whats the blink code your getting?

1,2 error code means NO ERROR FOUND. The set is older and may not be compatible with this set---what type of connection is being used and to which rear input?

ERROR CODE 12 IS "NORMAL OPERATION" IF THAT IS THE CODE THAT THE TV IS GIVING YOU THEN IT THINKS THERE IS NOTHING WRONG WITH ITSELF. YOU HAVE TO CHECK FOR THE ERROR CODE ONLY AFTER THE TV FAILS. TRY TO POWER ON AND IF IT DOESN'T THEN CHECK ERROR CODE.

error code 22 is an indication of a short in a low voltage power supplies

32 isnt a valid code for your model. Mitsubishi model WS55859 has only 5 possible codes they are 12, 21, 22, 23, and 24 Double check the code again and resond to this same post and i will assist you.

CODE / INDICATES
12 / No error has occured
21 / X-Ray Protect Shutdown
22 / Short Protect Shutdown
23 / Horizontal Deflection failure
24 / Vertical Deflection failure

X-Ray Protect circuit error code 21, make sure your counting it right because code 12 is no error

Did you push in the device and the menu buttons at the same time and get the error code...  I have the same problem and I get a 1,2 code....   I am looking for what the codes stand for...
Have you got any help on this....
Scott
mu email is [email protected]

ok 12 means no error detected so your set must have a standby voltage problem which is preventing the set from powering up. possibly a low voltage regulator is defective.

Need to know more, 1-2 is no error code, you say will not turn on, do it has led light on or do you hear sound in set like high voltage? Any lights blinking? Or just completely dead, like fuse blown?