Network issue the user is not able to access any shared folders on that time he is getting the error message.the machine is in network only ''the network connection was aborted by the local system.''

I found it somewhat difficult to completely Unshare files and folders on my HomeGroup Network and still allow Printer sharing in Windows 7 (Home Premium).

Initial UnSharing still allowed files like those below to be viewed on other home network computers:

C:/Users/

{user x} (folder)

AppData (folder)

Default (folder

Public (folder)

desktop.ini (file)

Other computers on the home network could step through many levels of hiarchy in the AppData folder and appeared to have "Delete" access!!

To completely decouple the computers, I had to go through the following several different Sharing/Unsharing assignment locations, till I could completely break the linkage.

I would appreciate any clarifications or simplifications.

File UnShare Confusion on HomeGroup Network

There are several different Network Sharing/Protection assignment locations in Windows 7.

To prevent all sharing between computers on the Homegroup Network, but allow Printer Sharing:

1) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options.

Uncheck sharing boxes that you don't want to share. Save changes.

2) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.

Click "Turn off Public folder sharing (people logged on to this computer can still access these folders)".

3) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.

Choose Media streaming options.

Click "Block All" button. Turn off. Click OK.

Anomaly Note: You have to close Control Panel and repeat all step 3 again for the change to take effect.

4) Open Windows Explorer.

a) Select "C:/", select "Users" folder with single click, then click "Share with" in toolbar.

b) Select Advanced sharing.

Under Sharing tab, select Advanced Sharing. Uncheck box labeled "Share this folder". Apply and close.

5) Open Windows Explorer.

Select "C:/Users/", select all folders and files under "Users", then click "Share with" in toolbar, then click "Nobody".

6) Verify success by going to other home network computer(s) and trying to access your files and folders. You should only be able to see there is a computer and not be able to see any folders of files.

smooth printer service

Try this:

go to start>run and type: \\ server ip address
for example, if its 192.168.10.20, type \\192.168.10.20

Navigate to that shared folder, right click on it and create shortcut.

If the previous step doesnt work, go to server, unshare that folder, restart and share it again. Try accessing it.

Hope this helps

Good luck!

That sounds more like the security settings on the pc are not set correctly. Should be nothing to do with the card or the laptop. This is just a windoze thing.

Share a drive or folder on the network To share a drive or folder on the network

1. Open Windows Explorer, and then locate the drive or folder you want to share.
2. Right-click the drive or folder, and then click Sharing and Security.
   • If you are sharing a drive, on the Sharing tab, click If you understand the risk but still want to share the root of the drive, click here.
   • If you are sharing a folder, go to the next step.
3. Do one of the following:
   • If the Share this folder on the network check box is available, select the check box.
   • If the Share this folder on the network check box is not available, this computer is not on a network. If you would like to set up a home or small office network, click the Network Setup Wizard link and follow the instructions to turn on file sharing. Once file sharing is enabled, begin this procedure again.

Notes

• To open Windows Explorer, click Start, point to All Programs, point to Accessories, and then click Windows Explorer.
• When you share a drive or folder, anyone who has user access to the network can read the contents of that drive or folder. If you want to remove the drive or folder from the network, follow steps 1 and 2 above to get to the Sharing tab. On the Sharing tab, in Network sharing and security, clear the Share this folder on the network check box.
• To allow complete access to the contents of your shared drive or folder, follow steps 1 and 2 above to get to the Sharing tab. On the Sharing tab, in Network sharing and security, select the Allow network users to change my files check box.
• To change the name of your folder on the network, in the Share name text box, type a new name for your folder. This will not change the name of the folder on your computer.
• If you are logged on as a guest (a guest account provides access to the computer for any user who does not have a user account on the computer), you cannot create a shared folder.
• The Sharing option is not available for the Documents and Settings, Program Files, and WINDOWS system folders. In addition, you cannot share folders in other user's profiles.

Hi

make sure the client computer you have logged into is been logged in with administrator rights.

Hope this solves the issue, if not revert back.

Make certain that ipx and spx protocol is installed on both machines. You have to go through windows setup network wizard through the netwok connection properties. Once you double click on that there it is the network wizard setup.

Follow the steps to Sharing the files

Your computers are already connected to a network — i.e., they’re all already able to browse the Internet using the same router..

1 : Open the Network and Sharing Center window by clicking on the Windows orb in the lower left corner, and then either right-clicking on Network and selecting “Properties”, or opening the Control Panel and double-clicking “Network and Sharing Center.
2 : If your network type is “Public,” you need to change it to “Private”:

1. To the right of the network name and location type, click Customize.
2. In the Set Network Location dialog box, click Private, and then click Next.
3. In the Successfully set network settings dialog box, click Close.

3 : Under “Sharing and Discovery” in the bottom half of the Network and Sharing Center window, you need to turn all the settings from “Off” to “On” by clicking on the down arrow next to each setting, clicking on “Turn on …”, and clicking on “Apply.” But see some pointers below:

1. For the “Password protected sharing” setting: you may want to leave this “On” or turn “Off” at your discretion. (I turned mine off.)
2. For the “Public folder sharing” setting:
   1. If you want to share the public folder so that other computers on the network can access the Public share to open files, but not create or change files, click Turn on sharing so anyone with network access can open files. This is the default setting.
   2. But if you want to share the public folder so that other computers on the network can access the Public share to open files and also create or change files, click Turn on sharing so anyone with network access can open, change, and create files.

4 : You’re done with the Network and Sharing Center window. Close it via the “X” button.
5 : Click the Windows orb at the lower left corner of your computer, and click on Computer
6 : n the Computer window, navigate to the folder containing the file(s) or folder(s) that you want to share — e.g., “Pictures” or “Documents” or a specific file or folder within. Note: don’t open the folder itself that you want to share — just navigate to the folder that contains this folder.
7 : Right-click the folder that you want to share, and then click Share. The File Sharing window is displayed. (Click picture for a larger version.)
8 : If you have password protected sharing enabled: Use the File Sharing window to select which users can access the shared folder and their permission level. To allow all users, select Everyone in the list of users. By default, the permission level for a selected user is Reader. Users cannot change files or create new files in the share. To allow a user to change files or folders or create new files or folders, select Co-owner as the permission level.
9 : If you have password protected sharing disabled (like I do): Click the drop-down arrow inside the blank field in the File Sharing window, and select the Guest or Everyone account. Click “Add.” Then for that new account, click on the down arrow under “Permission Level” to change it to Co-owner (if you want anybody to read and modify files) or leave it at “Reader” (if you want other computers to just read but not modify your files).
10 : Click “Share”, then “Done.”


CRITICAL NOTE: If you selected “Everyone” when sharing a folder, you’re also making its contents available to any computer that joins this network. Many households, including mine, have wireless Internet via a wifi router. If you don’t have WEP encryption turned on, then I could just drive up and park on the street near your home, open my laptop, let it join your network via your wifi, and then nose around through your files. It’s particularly important that you have WEP encryption turned on for your wifi network.

it is possible

If you have multiple computers in your home and they are connected through a home network, you can share files among your computers. That means you no longer have to copy files to a floppy disk or USB flash drive to transfer them to another computer. Once you configure your computer to share files, you (or another user with the appropriate permissions) can, by using Windows Explorer, open them from other computers connected to the network, just like you’d open files that are stored on a single computer. You can also choose to have folders visible—but not modifiable—from other computers on the network.
To share files on your computer with other computers on a network, you need to:
• Share a folder on your computer. This will make all of the files in the folder available to all the computers on your network (you can’t share individual files).
• Set up user accounts on your computer for everyone who needs to connect to your shared folder. If any of the accounts are Limited User accounts (unless an account is a Computer Administrator account, it is a Limited User account), follow the steps in Set permissions for files and folders to enable them to open your files.

To access shared files that are on another computer on your network, you need to:
• Connect to the shared folder from other computers on the network. This procedure is described in Map a network drive.

Note: By default, file permissions only allow your user account and administrators on your local computer to open your files, regardless of whether a person is sitting at your keyboard or at another computer. It may help to keep these three things in mind when setting up file sharing:
• Files have user permission settings.
• Every computer has its own user database.
• Some accounts are administrator accounts and some aren’t.

Configure your computer to share files To share a folder on your computer so that files stored in the folder can be accessed from other computers on your home network
1.
Log on to your computer as an administrator. For more information, see Access the administrator account from the Welcome screen.
2.
Click Start, and then click My Documents.
3.
Right-click the folder that you want to share, and then click Sharing and Security.
Tip: If you want to share your entire My Documents folder, open My Documents, and then click the Up button on the toolbar. You can then select the My Documents folder.
4.
If you see a message that reads, As a security measure, Windows has disabled remote access to this computer, click the Network Setup Wizard link. Then follow the instructions in How to set up your computer for home networking. On the File and printer sharing page of the Network Setup Wizard, be sure to select Turn on file and printer sharing. If you do not see this message, skip this step and go to step 5.
Note: If you do not see the Network Setup Wizard link or the Share this folder on the network check box, your computer probably has Simple File Sharing disabled. This is a common change made to computers used for business. In fact, it happens automatically when a computer joins an Active Directory domain. You should follow these instructions to share a folder instead.
5.
In the Properties dialog box, select the Share this folder on the network check box.
6.
If you want to be able to edit your files from any computer on your network (instead of just being able to open them without saving any changes), select the Allow network users to change my files check box.
7.
Click OK.
Windows Explorer will show a hand holding the folder icon, indicating that the folder is now shared.
To connect to the shared folder from another computer, follow the steps described in How to map a network drive.
Note: By default, only you and other people with an administrator account on the computer sharing the folder will be able to open your files. To limit access of specific users with an administrator account on the computer sharing the folder, read How to set permissions for files and folders.

Make it sure if the user you used in the laptop is administrator right because you need the administrator right to access some network computer. check also if the desktop share folder is share with full access it maybe the right is read only.

Check the user rights on the folder you are making? Also check if that folder is shared or not? Are you logging into both machines with the same username?
I would assign full rights to the username trying to access that particular folder from both pcs. Let me know
Thanks

Possible solutions.
1- Reset your harddrive using a pin through a little hole behind the drive.
2- Update the hard drive bios
3- download the lattest drivers.