Loss of power and inter-tel glx phone not ringing

SOURCE: Inter-Tel Axxess holding.

There is a timer option in programming called on-hold recall or Hold recall etc.. This would need to be changed by someone who has access to system wide programming features and cannot be changed on a per-phone basis.

SOURCE: Inter-tel Access

You definitely need to have a local phone installation company come in and help you with this. Axxess system setup and programming is extremely complicated for someone that has not worked with it and it requires specific software to make program changes. If you know the company that installed (or services) the system you should call them.

SOURCE: change the ring tone

Dial 398...Merry Christmas!!

george peters

• 860 Answers
• Posted on Dec 22, 2009

SOURCE: Speed dial help

To set speed dial numbers,with the handset down press the SPDL key(the key should flash)
enter in the 1 digit memory location code (1-9)
enter in the telephone number (up to 32 digits)
then lift and replace the handset. You should hear a confirmation tone and the SPDL key will stop flashing

To use pick up the handset, access a line and press SPDL and the location code (1-9)

SOURCE: When conferencing two outside parties, how can I

The Inter-Tel will not allow you to leave the conference without disconnecting the outside parties, this is the system design. The hold recall time could possibly be increased to reduce the aggravation.