Lost disk can u tell me were i cam download the installation disk for my dlonk router and also a netgear dongle V3

How did you post this? Go to manufacturer's website, download driver then put it on USB stick and transfer it manually to computer in question.

have you tryied to log in to the config page

1. Launch your web browser. Enter "http://192.168.1.1" into the address bar and press the Enter or Return key.

Everything for your model is HERE.

Hope this helps!

--RescueTechLA

go to the netgear website , go to the downloads / support section , select the model of wireless dongle and you should be able to download the drivers / software from there website

http://www.netgear.com or http://www.netgear.co.uk

you can get it here http://drivers.softpedia.com/progDownload/Netgear-WGR614v7-Firmware-1014-Download-22549.html

You'll need to connect your computer directly to the DSL or cable connection, then go to the Netgear website and download the software to install the router. Once downloaded, install the software and go from there :)

try this http://kbserver.netgear.com/downloads_support.asp

Have a look at links below
http://support.dlink.com/chooseCountry.asp
http://www.dlink.com/

Hello, Here is a link for the firmware and drivers for your router. Hope this helps.
http://kbserver.netgear.com/products/wgr614v6.asp

connect the yellow (or blue?) ethernet cable to your computer, this should connect to the router (router should be ON)

Now, in internet explorer type 192.168.0.1 (this should be the defualt gateway for the router on default settings.

Now you're into the router, there should be a setup wizard button in there.

See if you can set it up using that

Regards

Tony