Hi i have a scandiskc150 but the pc does not register it

The use of SATA hard drives on SAS controllers is made possible by the fact that both share the same infrastructure and have similar features. SAS drives cannot be plugged into SATA controllers.

a waste of time and effort installing win xp on anything as it is no longer supported by Microsoft and had real problems with drivers for just about everything
install win 10 and it will work

Hi,
have you loaded the ipod? If not you will need to first register your product and download the drivers- iTunes software- so that the media to be loaded to the Ipod must be converted and copied to the Ipod from your PC.
So in this case you need to connect to the official site and register your product, then proceed to download and install.

Everything you want to know about 'SAS' (formerly known as the Statistical Analysis System) can be found at: http://www.sas.com

Try to reseat the controller from the PCI slot.
Reseat the SAS cable.
Here are the drivers you may need:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3303460&prodTypeId=12169&prodSeriesId=4150338&swLang=8&taskId=135&swEnvOID=1060

update your SCSI controller drivers and power cycle the server

What RAID controller are you using? Also, you must first configure RAID in CTRL-C (SAS 5/6) or CTRL-R (PERC 5/6) before even loading the driver will help.

the driver are available here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3571757&lc=en&cc=us&dlc=en&lang=en&cc=us
download them to your desktop, install and restart the omputer..

Use the smart start CD!

Hi! you can use link below to download drivers and software for printer.
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?taskId=135&cc=us&lang=en&prodSeriesId=409994&prodTypeId=18972