Lexmark C543dn 26B0000 Workgroup Up to 21 ppm 1200 x 1200 dpi Color Laser Printer Logo

Question about Lexmark C543dn 26B0000 Workgroup Up to 21 ppm 1200 x 1200 dpi Color Laser Printer

2 Answers

JUST INSTALL MY NEW PRINTER, LEXMARK C540 SERIES, I KEEP GETTING A ERROR MESSAGE THAT READS 100.08 SERVICE PRINTHEAD ERROR. WHAT DOES THIS MEAN PLEASE? I HAVE INSTALLED AND UNINSTALLED TO REINSTALL. THE PRINTER IS CONNECTED TO A COMPUTER THAT WILL BE SHARED ON A NETWORK.

Posted by roxannemcben on

2 Answers

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,087 Answers

Most of the time the problem can be resolved by reseating the printhead cable which can be accessed by opening the back cover of the printer. If that won't resolve the problem, I recommend to have it serviced. It's a possible defective printhead.

Posted on Apr 30, 2010

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

-Problem with laser unit.It must be opened and cleaned (mirrors) but in the lexmark service.Waranty.

Posted on Oct 20, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How Could you fix a Lexmark cartridge error?

Sol Some of the common errors related to printer cartridges are Errors 1102, 1203, 1204, or 120F and 929.
Error 1102 or 1200
This error message flashes when the cartridge/s is incorrectly installed or snapped in. Wrong installation of cartridge replacements causes communication problem between the printhead and the printer.
Error 1203, 1204 or 120F
This error also has something to do with installing the printer cartridge. This error message is related to alignment problems; which means a printer cartridge or cartridges is short or was not align with the other cartridges. A foreign object blocking the cartridge's path may also another reason.
Error 929
This error message is shown when the printer reads the printer cartridge as damaged or defective. The toner sensor appears to be not working properly and may warn about replacing a new cartridge.
What are the basic solutions to these Lexmark X5650 Cartridge Errors?
Fortunately, when any of these error messages appear on your Lexmark X5650, you can use one solution to them all - reinstalling the cartridge. Here are the steps.
Turn off power and unplug printer.
Open the control panel to access the printer cartridge.
Check each cartridge's alignment. Check for foreign object inside the printer. Check if the printer cartridges are securely locked or snapped in their places.
Reconnect power cord and electrical outlet.
Power on and wait for the printer to read the cartridges.
IF the same message appears, repeat the process.
If problem persists, you might need to install a new printer cartridge.
Printer errors are inevitable. Therefore, it is important to learn the basics troubleshooting to prevent them from happening. Better yet, make sure that you install quality replacements to your Lexmark X5650
You need of any our Technical Support agent. Please call Technical Support team at +44 203 880 7918 our experts are available 24/7 by phone.

More Info - https://printercontactsupport.co.uk/lexmark-printer-support/
0helpful
1answer

I keep getting an error saying my printhead is missing on my lexmark printer

Try to clean the contacts of the printhead and the printer. If it doesn't work, unplug the power of the printer for about 30 seconds and plug it back in.
0helpful
1answer

Installed new black cartridge - had ink

A firmware update for your model addresses the print quality problem that you're currently experiencing. Please visit the Lexmark website to download and install the Lexmark S400 Series Firmware Update. If more than one download is listed for your model, choose the first download in the list. If it is the wrong firmware level, an error message will tell you which firmware level is correct.
Should the error continue to display even after successfully updating your printer, please contact Lexmark Technical Support Center for additional assistance. Your printhead itself might be the cause of the problem.
0helpful
1answer

There is a problem with the pinterhead please help its a lexmark pro705

A firmware update for the Lexmark Prevail Pro705 will help fix the printhead issue you are experiencing. Please follow the steps below on how to successfully update your printer:
  1. Open the printer cover and remove the printhead and tanks (if installed). Note: Carrier will come to the center automatically with this error message as the cover is opened. Remove the ink tanks > open the printhead latch and remove the printhead > close the printhead latch, close the printer cover and confirm the error message goes away from the operator panel.
  2. Proceed with the firmware update. Please visit the Lexmark website to download and install the Lexmark Pro700 Series Firmware Update.
After successfully updating your printer, open the printer cover > re-insert the printhead > close the printer. If no printhead error comes up, continue with normal installation steps for cartridges. If error comes up again, please contact Lexmark Technical Support Center for further assistance.
0helpful
1answer

Mt printer reads I have trouble with my printhead

There is a firmware update for the Lexmark Interpret S405 printer that addresses printhead issues. Please visit the Lexmark website to download and install the Lexmark S400 Series Firmware Update. If more than one download is listed for your model, choose the first download in the list. If it is the wrong firmware level, an error message will tell you which firmware level is correct. Please indicate if the update failed or successful.
0helpful
1answer

Printhead is not supported by the all in one

A firmware update for the Lexmark Prospect Pro205 will help fix the printhead issue you are experiencing. Please follow the steps below on how to successfully update your printer:

  1. Open the printer cover and remove the printhead and tanks (if installed). Note: Carrier will come to the center automatically with this error message as the cover is opened. Remove the ink tanks > open the printhead latch and remove the printhead > close the printhead latch, close the printer cover and confirm the error message goes away from the operator panel.
  2. Proceed with the firmware update. Please visit the Lexmark website to download and install the Lexmark Pro200 Series Firmware Update.

After successfully updating your printer, open the printer cover > re-insert the printhead > close the printer cover. If no printhead error comes up, continue with normal installation steps for cartridges. If error comes up again, please contact Lexmark Technical Support Center for further assistance.

6helpful
2answers

"there is a problem with the printhead"

Sounds like you need a new one. The best place to buy is amazon (because of reviews and price). take a look Lexmark Printhead cheers
problem-printhead-uh3jsoynacgcqh0wcsujgpyu-3-0.jpg
3helpful
1answer

I have a lexmark prospect pro 200 series printer and there is an error message that reads "There is a problem with the printhead. Please consult User's Guide."

Updating the firmware for your Lexmark Pro200 series will help fix this problem. You will need to get rid of the error first before you can successfully update your printer. Follow these steps: 1. Open the cover of the printer > Remove the printhead. If the printhead will not go to the center, turn off the printer and pull the printhead to the center. 2. Once you have the printhead removed, close the cover of the printer and turn on the printer. 3. It will ask you to "Open Cover to Install the Printhead". Press the Cancel (Red X) button. 4. It should take you back to the "Copy" menu. 5. Proceed with the firmware update. Just go to http://bit.ly/p205fw. There'll be more than one download for your model, try the top download first. 6. Once the firmware update is successful, reinsert the printhead by following the steps on your printer screen.
Source: There is a Problem with the Printhead
0helpful
1answer

I have a Lexmark Interpret S405. Keep getting an error message to replace the printhead. Did this numerous times and keep getting same message. What do I need to do>

It sounds like the printer is having problem recognizing the printhead. If you're getting "Printhead Error", make sure you have the latest firmware update. You can download and install it from Lexmark at http://bit.ly/adzmDq. If you continue to have trouble, contact Lexmark technical support. Thanks.
7helpful
3answers

I have a Lexmark E450dn displaying a "935.15 Service Printhead" error message and will not print. Seeing as Laser Printers do not have printheads, instead they have Scanners and Fusers, which should I be...

a 935 printhead error is a fatal error which means the scanner motor has failed to initialize. the term printhead is short for printhead scanner. this error can be caused by either the engine board or the scanner % wise 40%engine board 60% scanner ive done 120 repairs on lexmark laser for the last 7 years trust me one of these is the problem
Not finding what you are looking for?

894 views

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4362 Answers

Cindy Wells

Level 3 Expert

6611 Answers

Marvin
Marvin

Level 3 Expert

85242 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...