Where can i get a replacment key for nutool sf20 safe have number

Here are a few steps you can try to unlock your Nutool SF20 electronic digital safe:

1. Double-check the battery installation: Make sure the batteries are correctly installed and not dead.
2. Try the default code: Many safes come with a valuable default code in opening the safe when you forget your code or if the keypad stops working. The default code is usually found in the manual or inside the safe door.
3. Check the locking mechanism: Make sure that the locking mechanism is not jammed or stuck. Try manually moving the locking mechanism with a screwdriver or other tool to see if it will release.
4. Use the override key: If your safe has an override key, insert it into the keyhole and turn it to the left or right to open the door.
5. Contact the manufacturer: If none of the above steps works, contact Nutool customer service. They may be able to provide you with additional troubleshooting steps or advice, or they may need to send a technician to repair or replace the safe.

Hi. Get a hammer & chisel remove the front panel with chisel it comes of easy after u have it off chisel of the lock off & put you're finger in the hole & push the lever inside to open the safe ...cheers hi

How to open digital safe when battery is flat and key not working

I hope that don't feel too safe with this safe!

A locksmith should be able to make a key for you. If you can contact the manufacturer they might be able to help.

instructions to reset the combination on a nutool SF5 safe

Open the safe door and press the s key press the 1 key twice then press the red button on the inside of door near the hinges.
you will hear 2 long beeps.
enter your combination up to 12 numbers then press the E key your combination is now set

Any good locksmith can get one for you

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

I need an instruction Manual for a Nutool sf20 safe