At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
If this is a 50V500 record the I2c buss settings then "Memory Inti" then re-write the recorded data. Solves about 80% of the color distortion problems. If it's not a 50V500 you need to expound on your problem and include the model number.
Bill
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.
the more the tv remains on the picture gets out of focus mainly in the midle of screen. Sure sounds like tv needs some light engine repair or replacement.
The TV is on protect mode.
This happens when an internal fault is detected.
Start leaving the TV unplugged overnight. This will drain power discharging capacitor and internal circuits, and sometimes can solve minor problems.
If the TV still does not start , it must be taken apart and tested.
Parts that commonly fail are the PSU, controller board, low buffer and sustain boards.
If the TV is only 13 months old, then it is worth calling Hitachi and asking for a warranty extension or a discounted repair.
Regards.
Usually this is caused by unproperly hooked up component video cables. Check the green, blue and red component video cables on the tv and on the device (cablebox) to hopefully solve the issue. Sometimes one just pulls loose also
×