Question about HP DesignJet 2500cp InkJet Printer
Hello. You probably have a worn out trailing cable. The manual says:
System Error: 010036 (see next page for 010036 0000XX00)
Problem Description: ADC Test Failure in the Main PCA.
Corrective Action: Try the following:
Switch the Printer OFF from the back and
then disconnect the Trailing Cable from the
Electronics Module. Switch the Printer ON and
see if the Error Code now changes to “010037”.
If the error code remains as “010036”, replace
the Electronics Module page 8-6.
If the Error Code changes to “010037” then try
Make sure that the Trailing Cable is
Replace the Trailing Cable page 8-36.
Replace the Carriage Assembly page 8-42.
The manual can be downloaded at: www.lpscomputer.com/ec/manuals.htm
Posted on Apr 29, 2010
This can be caused by a faulty electronics module, trailing cables, printhead carriage assembly, or ANY of the stepper motors.
Switch the printer off from the back, and then disconnect the trailing cables from the electronics module.
Switch the printer back on.
If the error code changes to '010037'
If the error stays as 010036, change the Electronics Module.
If it is 010037, replace the trailing cables, then the carriage assembly.
Trailing Cable Part No. C4704-60015
Electronics module Part No. C4723-60114
Posted on Apr 30, 2010
Tips for a great answer:
Aug 09, 2016 | HP HEWC1806A - C1806A Ink
Aug 11, 2011 | HP DesignJet 2500cp InkJet Printer
Mar 26, 2011 | HP DesignJet 2500cp InkJet Printer
Nov 11, 2010 | HP DesignJet 750c plus InkJet Printer
Apr 29, 2010 | HP DesignJet 2500cp InkJet Printer
Feb 08, 2010 | HP DesignJet 2500cp InkJet Printer
Apr 22, 2008 | HP DesignJet 1050c InkJet Printer
Aug 11, 2013 | HP DesignJet 2500cp InkJet Printer
264 people viewed this question
Usually answered in minutes!