How do I set the time on a pioneer premier cd player?

turn off the unit. after it powers down hold the function key and a menu pops up. from there just hit the function key untill you find aux and then turn it on.

Press function button repeatedly until clock appears on the display of your Pioneer DEH-P480MP. Press the left right arrows to select what you want to adjust, hour or minute and then press up and down arrows to adjust it. You can find these instructions in the user manual, page 37.

sorry to tell u this but u going to has to buy this cable fron pioneer , cost about $20-$35 , or u can go to a tv shop or car stereo places and see if they have one for less

Here's the Owners Manual link for your pioneer stereo...

http://www.pioneerelectronics.com/StaticFiles/Manuals/Car/DEH-P410UB_OperationManual1021.pdf

Setting the Clock is addressed on Page 29

I hope that helps.

CLICK HERE for your manual.


Unfortunately for you, this Head Unit does not have the function you want.
The display is green by the factory, and the type of display installed cannot be changed or customized.

Thanks for using FixYa - a FixYa rating is appreciated!!

to change these types of setting you must turn off the stereo (hold off) then PRESS & HOLD the menu button (mines a different model but the menu button is pressing the volume knob )

You might find some help in the owner's guide:
Pioneer manuals 

On most pioneers you press source to turn the radio off (while the car is still in the run or ACC positin). Then press and hold FUNC to enter the menu. Then use the directional joystick to make the changes.

http://www.theusermanualsite.com/manuals/mfg/pioneer/dehp960mp.html Follow the link for your manual

hey... i hope this it worth a 100% vote lol.. Premier CD PlayersHow do I set the clock on my single CD player? For most Pioneer single CD players, you can set the clock using the following steps: Press and hold the SOURCE button until the unit shuts off. Press and hold SOURCE again until the clock appears. With some models you will press and hold the FUNCTION or AUDIO button instead of the SOURCE button. Press the left or right arrow to select the segment of time you wish to adjust. Press the up or down arrows to increase or decrease the numbers in the blinking segment. Once the clock is set correctly, press the SOURCE button to exit.