Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)
Step 1:Connect Modem - Router - Computer (Wired)
Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3:On the Left click firewall
Step 4:Leave the Password blank and click submit
Step 5:Disable it and click apply changes
Step 6:Scan and connect in the Xbox
Step 7: Get the IP Address of the Xbox
Step 8:Open Router Setup in the Computer
Step 9:On the left under Firewall Click DMZ
Step 10:Enable the IP Address of the Xbox in it
Step 11:Click Apply Changes
Step 13:On the left Under Utilities click System settings
Step 14:Scroll down to the bottom
Step 15:Enable UPnP
Step 16:Click apply changes
Step 17:Test the connection ,Check the NAT
If working then let me know
Goto : my blog for more information about belkin routers (Page is still under construction )
If it is still not working
Open Router setup
At the middle Under internet settings check the WAN IP
IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem
Posted on Aug 12, 2010
1.Go to the Belkin router and look at the page for game setup
2.Go to the DMZ set up for your X BOX there.
3. Check the router manual page 74 for further instructions.
4. when not playing disable the DMZ.
Posted on Apr 24, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Change NAT to open
i have the same problem, ive looked at the thread its the same as myne but when i go on the virtual servers it doesnt say discription or imbound port it just says lan port publick port i dont understand :(
Posted on Feb 11, 2008
go into the router settings and look for uPnP and enable this it will then open the firewall for your xbox automatically
Posted on Sep 10, 2008
SOURCE: Strict NAT
Ok this is how its done. Open your DMZ on your router interface click enable. The IP address you'll have to enter the last digit. This IP address digit is found on your xbox, look under your xbox network setting an get the last digit of IP address an this will only set your xbox to open. bang thats how u fix it. Very simple. any Q's am @ [email protected]
Posted on Mar 05, 2010
Tips for a great answer:
Mar 27, 2011 | Belkin Office Equipment & Supplies
Feb 19, 2011 | Microsoft Xbox 360 Console
Jan 25, 2010 | Trendware TEW-231BRP Wireless Router...
Jan 19, 2010 | Microsoft Xbox 360 Console
Jan 16, 2010 | Microsoft Xbox 360 Console
Jun 01, 2009 | Zyxel P660HW-D1 Router
Apr 16, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...
Jan 15, 2008 | Zyxel Prestige 660R Router (91004397002)
1,197 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: