My canonS200 every time i try to install my canon it tells me theres no softwhere i lost my disk what do i do

I lost the disk to my canon mg3250 and need to re-install on my PC as I wiped everything. I tried downloading from the site but it my PC says it doesn't recognise the software even though I have put the correct operating system choice in?

Hello, here you can get the software for free.

Canon Support Drivers PIXMA MP270

If you are looking for the printer driver for your Canon printer then -
You can download the Canon printer drivers from their supportWEB site. Please click on this link and select your model printer to download :-http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

1st You download Webcam Driver.
drivers or softwhere for easy cam pro mn 98669After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Dont worry. For photo transfering not nessary to use the software. buy a card reader then use your camera memory card connect with it in pc, and transfer all the phoos.

Thanks, i am waiting for your feed back & if you satisfied then thumps me please.

If you do not have the software, you need to download the software from one of the following locations:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS

After ending download , unplug the printer USB and run the software that you downloaded.
The software installer will tell you when to connect USB.

If you do not have the software, you need to download the software from one of the following locations:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS

After downloading is finished, unplug the USB cable and run the software that you downloaded.
The software installer will tell you when to connect USB.

Go here, select your model from the drop down menu and then on the next page, select your OS and install.
http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

try this link
http://www.download.com/BJ-Printer-Driver-Canon-Pixma-iP3000/3000-2116_4-10555913.html

how do i install my printer onto my new computer if i lost the installation disk or cd rom?
I've lost the installation disk for mu Canon PIXMA iP4000. How can I download for free to reinstall? Thanks.....George