Question about Samsung HL-R6167W 61" HDTV

2 Answers

T.v. will not turn on. flahes "lamp" then no picture!

Samsung HL-R6167W

when we try to turn our tv on the green lamp light flashes. we can tell the lamp is on because the screen appears to light up, but just stays black. it will flash for about 45 sec.-1 min. then go off,but the screen will just stay black or sometimes the lamp goes off and the red standby/temp light will come on and stay on.

Posted by kelemimool on

  • 1 more comment 
  • jeff411 Jun 04, 2008

    My TV is doing the same thing. Did you ever find out what the problem was. I noticed that the fan just above the cable card slot that plugs into the analog card was not running. I checked another fan that was working on the same plug in, and it also failed to start. Could the problem be with the analog board?

  • arkper Feb 02, 2009

    Same exact symptoms with my HL-R5067W set...

  • Pedalhead Mar 30, 2009

    I have the same problem. My Samsung HL-R4667W shut down fine Thursday night then on Friday morning it started and booted up to the TVguide start page...pressed enter as always...then it went blank with no sound...I assumed my daugther had changed the source playing with the remote but then noticed that when ever I pressed a button the Timer LED would flash and then realized it wouldn't even shut down from the remore....A bit more playing with the remote and then the Standby/Temp light came on solid. Assuming it needed to by rebooted or something I went to unplug the TB and noticed there is light coming from the back of the TV so it seems like the Lamp is working.
    1) unpluging and restarting on Friday did the same thing but I didn't even get to the TVguide or any sound
    2) Saturday I plug the TV back in and it started up fine for about 2 minutes then the picture went all rough on the edges, TV became unresposive to remote (Timer LED flashing with each button pushed), picture when black and standby/TEMP LED came on solid...unplugged it again!
    3) Sunday pluged the TV back in and still the Standby/TEMP LED is on solid all the time... But for giggles I tried the Factory start up (Mute, 1, 8, 2, Power) and it started up fine. Checked the lamp life and it came in at 5667hrs. TV played fine for an hour and shut down fine but after the fan turned off (standard 1-2 minutes cooling time) the stupid Standby/TEMP LED is on solid...unplugged the power, then plugged back in and still Standby/TEMP LED is on solid. But for now the TV seems to work

    Previous Issue:
    1) Color wheel exploded and I replaced it without incident.

    Question:

    1) Right now I'm planning to replace the lamp since the hours are getting up there but I have a horrible feeling that the fact that the Standby/TEMP LED is on solid is a bad sign suggesting some other problem since the standard indicator for a bad lamp is "All three LEDs flashing LAMP, TIMER, STANDBY/TEMP"

    2) I'll Try and update this post after the Lamp is replaced to see if it fixes the problem

×

Ad

2 Answers

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 59 Answers

This will have to be narrowed down to a specific problem. I would try the easiest things first. First check the lamp. Is it bad or just starting to go bad or does it just need to be reseated with the ballast? If the ballast flickers when turning on your TV, then you will know it is the lamp that is not working or the ballast may need to be replaced. If that is not the problem next check to see if the color wheel is spinning or broken. If broken, it will need to be replaced. If not spinning it is the DMD board that is bad. The color wheel is plugged into the DMD board. If the DMD board is good it will spin the color wheel, that is what will start your lamp. When you lamp starts, you have your picture.

Posted on Mar 23, 2008

Ad

Silvia Kimbrough

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a picture but the tv will periodically turn itself off during the day and then flash the 3 blinking lights...anyone know what the problem could be. We can fix it ourselves if we knew for sure what it is.

Posted on Jun 06, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a Samsung HL-R5678W DLP TV that is acting up. When I first turn it on everything works, after 5 minutes it shuts itself off. After 2 minutes it will come back on without sound. It will do this a...

U turn tv on hear any squiling,grinding or motor noises?Picture show up before it shut down picture have flashes of black&white within the picture?Yes,to all of these,this tv have a colors wheel and it dead,require the colors wheel replacing.No,none of these problems.The tv projection lamp,if in this tv like a 1 1/2 or 2 years,tv ben on an watches like 4 or 5 hours a day?The "LAMP" LED light indication lite up or flahes,the projection lamp life is over.Require a new projection lamp.
0helpful
1answer
1helpful
1answer

TV makes humming noise, lamp light is blinking, does not turn on

Your color wheel needs to be changed. Mine just did the same thing. I changed mine, and the buzzing sound went away, however now my picture washes out with light or yellow colors. The darks look green and purple also.
0helpful
1answer

My tv turns off

Power issues (Tv True True (``````````` (``````````` 0 95250 95250 clip_image002.gif not turning on) were typically due to faulty ballast. While the TV reports a bad lamp it is the ballast itself causing the issue. Samsung True True (``````````` (``````````` 0 95250 95250 clip_image002.gif is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having issues.
0helpful
1answer

HL-r6167w wont start up (HELP)

it sound like the color wheel is bad
Not finding what you are looking for?
Samsung HL-R6167W 61" HDTV Logo

474 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76763 Answers

Ekse

Level 3 Expert

13435 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...