My freespirit treadmill showsL5 on nthe display then quits

Of you wish to get some details about treadmill repair service mode and calibration then check the following link
http://electro-medical.blogspot.com/

LOOK FOR A RESET BUTTON

This may be a faulty speed sensor.
Or a faulty LCB

check this site http://www.howtomendit.com/answers.php?id=180324. hope this helps

Landice L9 tredmill, L5 display on screen,belt runs slow and nothing else works to the touch.

Yeah - the sensor is the problem... It is magnetic... You can find it next to the wheel on the belt - It is fairly small.... There is a metal disc in the wheell on the belt that is a magnet.. As it passes by the sensor - the sensor registers the magnet and can simply calculate speed based on the frequency of the passes... Sometimes the sensor slides too far back and ergo can`t register the magnet passing by - Then you get the L5 error...
Follow this link to a picture!
http://www.angelfire.com/nm/nickm/freespiritl5.html

hi, Plaese check the Power point

Showing l5 or ls on sceen of my york t101 treadmill please help me out thanks.

hi,
LS mean low speed error, Please check the sensor wire( if moor move). if not move please check control board.