My Fujitsu Siemens Amilo Pro laptop runs fine on mains power it recognises the new battery I have purchased and charges it to 100% no problem, it is listed in the power settings and all seems fine.
I have ran the Battery learning utility (F6) it ran for 8hours draining and recharging it ended correctly with no error messages and all seemed fine.
Could you tell us more information. A laptop can't work, A computer does not work for a number of reasons. Not just the battery issue.
1)Reason
a.No voltage.
b.External shot circuit or overcharge,
anti-charge
c.Cells expansion and short circuit caused by direct anode
contact and continuous high efficiency electric current
overcharging.
2)Solutions:
a.Check if the battery is without voltage or
electric current.
b.Avoid short circuit.
c.Avoid collision and pressure
among batteries.
d.Charge the battery after it automatically powers off ,
then full charge the battery.
source from laptop battery site:http://www.buy-battery.ca/faq.htm
When you pluging adapter, your laptop computer is supplied by adapter, not the battery. Please check the voltage and current of your battery, and ensure that they are the same with your original battery. If the replacement battery is not compatible with your original battery, your laptop computer will not work well, and it is easy to damage motherboard.
793 views
Usually answered in minutes!
My Fujitsu Siemens Amilo Pro laptop runs fine on mains power it recognises the new battery I have purchased and charges it to 100% no problem, it is listed in the power settings and all seems fine. I have ran the Battery learning utility (F6) it ran for 8hours draining and recharging it ended correctly with no error messages and all seemed fine. When I unplug the power supply the laptop doesnot run on battery and the screen just goes blank.
×