MY MINI SPY PEN DVR BROKE DOWN . NO USB DETECTION AFTER CONNECTING TO PC

that would be unknown

there are different reasons behind your USB cable not recognize such as:

• unplug your computer/laptop: unplug the computer from the power supply , because most of the time computer or laptop don't turn off completely and mother board still get power.
• Motherboard need rebooted: Some times mother board can go wrong and USB ports stop working.in this situation motherboard need reboot.
• Update Device Driver
• Restart and Disconnect USB Device
• Uninstall Hidden Device
• Uninstall USB Device
• Update generic USB Hub

for more help i will suggest you customer support help number +1 855-461-5433.

Try charging it through its USB port. The battery is probaby flat from laying around.

It usually has a usb connector that you can connect to your pc. If not, you would need to remove th micro sd memory card and transfer data using micro to regular sd converter

If you have a Spy Pen, sometimes it just appears to be either stuck with the light on, or dead and won't turn on. We wrote this report to show you some of the tricks we found to getting your it to work again.
1. Perform A Hard Reset
The majority of the time, just inserting the end of a paper clip in the opening below the status light on the back, and performing a hard reset, will get your Spy Pen working. Just bend a small paper clip end out, and insert straight into the opening. When you meet resistance, push lightly, and you can feel the reset button depressed.
Make sure it goes straight in, and not at an angle, or you could damage some of the components inside. Let go and try to turn it on.
2. Rule Out The USB Cable
If you are using a USB cable to either connect the Spy Pen to your computer, or to the 110V wall charger adapter, one day the cable will fail. If you use the USB cable because you can't connect the pen directly to the computer, try just plugging it directly into the computer.
Don't use a USB hub, as sometimes there is not enough power for the it; just connect it directly to the computers USB port. On some computers, use the USB port on the back, as front USB ports are sometimes weaker.
3. Rule Out The 110V Wall Charger
Just like the USB cable, the 110V wall charger adapter will also fail at some point; so if it does not seem to take a charge, try charging it for 3 hours in the computers USB port. If the status light is on while its charging, its getting electricity to charge the battery.
4. Put The Spy Pen Back In Video Mode
Several Spy Pens have switches to go to photo mode, or voice activation mode. If you move the switch to change modes, and you do not move it back to video mode, the computer will say it is not recognized. Try moving the switch back to the original position.
5. Erase & Reformat The Spy Pen
If the Spy Pen shows up as a removable drive on your PC, just right click on the icon and let go on "Format." Then check the "Quick Format" button, then hit OK. The drive will be erased, and reformatted. This usually takes care of any pens that make it this far.

No idea of any agents in india as they do not appear on our europeon agents list .Sorry

How To Update Time Automatically of Spy Pen Camera

1)
Connect the camera to computer via USB cable

2)
Download GetSysTime at http://diganet.net/downloads.html

3)
Click GetSysTime.exe to update the date and time, the
time of the camera will synchronize with the time of computer after restart of
camera upon reconnecting.

you've been scamed mate

my pen cam (4gb) bt not working and not connected in pc what is the problam plz tell me and we charge the pen 5-8 hrs bt,not wrking this is my mail id ([email protected])

i have recently brought 8gb pen spy cam.when I am attaching it with my p c it is simply not showing up when I open my computers section.I am unable to know whether it is working - plz send me to [email protected]