At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I drive a 1991 mercedes 560 sel and i want to change the stereo in it. The only problem is the wires that i need to connect to the new deck are not colour coded the same way the instructions are for the new deck
Re: I drive a 1991 mercedes 560 sel and i want to change...
See if the store that sold you the radio has a wire adaptor kit. they are available for most american/japanese cars so i would think a mercedes one should be available.makes easy work out of the job
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
catalytic converter is clogged basically its stopping up your exhaust. Over time the pressure will slowly vent out, allowing your car to start, only to build up the backpressure again, stalling engine.
The radio station sends information by embedding it in the radio waves before transmitting it through air by its transmitters. This process is called modulation and it is done by changing any of its basic characteristics, frequency or amplitude.
hello I'm an M.B. tech, sorry I thought I sent this yesterday but it is not in my solution box. If your vehicle is actually blowing hot air and not just ambient ait through the vents the only reason this could be is that coolant is entering the heater core all the time. Mercedes had 2 ways of doing this from that era. The earlier version had a vacuum water valve against the rear firewall. The other version had an electric valve called a mono valve by the battery tray. I would think it would be very likley to knock of a vacuum line doing an oil change but most likley you would have other problems as well. The water valve had a red vac, line going to it. Your vehicle probably has the electrical valve which is ublikley to get damaged during an oil change. most likley the diaphram is ruptured. There are 4 slooted screws on top of the valve. If you remove those screws you will gain access to the insert(plunger for solonoid). Take the rubber seal and stretch it out. Take a close look for tiny tear in seal. It is a very common problem with the monovalve type system. You can replace just the insert and it saves alot of money as compared to the price of the monovalve. hope this is helpful.
×