- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, Direct Code Entry: Find the code your device. 1. Press and hold "CODE SEARCH". 2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed. 3. Enter the 3-digit code number. 4. Release "CODE SEARCH". 5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have. follow the below steps to set remote without codes Code Search: 1. Turn on the device you wish to control. 2. Press and hold "CODE SEARCH". 3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed. 4. Release "CODE SEARCH". 5. Press ON/OFF repeatedly until the device turns off. 6. When the device shuts off press and release ENTER. 7. Try using the remote. If it does not function repeat steps 1 through 6
Please follow the below steps to set up your programme Direct Code Entry:
Find the code your device.
Press and hold "CODE SEARCH".
Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
Enter the 3-digit code number.
Release "CODE SEARCH".
With the device on, press another button to test. If it does not work, repeat steps 1 thorugh 5.
Code Search:
Turn on the device you wish to control.
Press and hold "CODE SEARCH".
Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
Release "CODE SEARCH".
Press ON/OFF repeatedly until the device turns off. You may have to do this up to 100 times.
When the device shuts off press and release ENTER.
Try using the remote. If it does not function repeat steps 1 through 6.
I know this is an old post, however if anyone else needs to know how to program the RCA RCR 615 DCM1 universal remote here is how: Turn on the device you wish to program, dold the device button you wish to program (tv, vcr, dvd, etc.) While holding the button with one hand, press and hold the power button with the other, hold both buttons until the device button lights up and stays on then release both buttons at once. Light should remain on. Point remote toward the device and press play button every 5 seconds until device shuts off. Once the device shuts off, with remote still pointed toward the device, slowly hit the reverse button (rewind button) until the device turns on again and then hit stop button. Now your device should be programmed. Repeat for each device. Hope this helps someone, because I had this problem myself and I played around with the remote until I figured it out . This may work for other RCA RCR----- remotes as well.
Try with this;
Turn on your tv.
Press and hold Code Search until the indicator light lights,then release Code Search.
Press and release the device button the indicator light will blink once then remain lit.
Press and release Off/on until your device turns off.
You may have to press Off/on up to 200 times.
When your device turns off press the Enter button the indicator light go off.
Good luck.
Big button remote rcr 4258 does not have all the codes for every product,
Please give me the model # for the cable box -scientific Atlanta and the model # for Magnavox T.V. also goto www.replacementremotes.com (336)969-1842 They will find you REPLACEMENT remote control CODES, not remote control
×