I had the same problem and re-powered the unit, then hit the "COPY" button then hit the "BLACK" button and it worked! I had the same problem and re-powered the unit, then hit the "COPY" button then hit the "BLACK" button and it worked!
AnonymousMar 20, 2014
when using copying mode, prints well until 3/4 way through, then slows and prints only black from then onwhen using copying mode, prints well until 3/4 way through, then slows and prints only black from then on
You can't post conmments that contain an email address.
I had the same problem andre-powered the unit, then hit the "COPY" button then hit the "BLACK" button and it worked! Check on this: https://printerguidelines.com/
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Grinding Noise has something to do with the scanner not the Printing Part, I think the scanner could have something stuck on the moving tray....!!!!!!
For scanning - use window drivers, try under window Photo Gallery. Works fine. For printing, the problem is when it tries to "delete" a file it prints it fails. Can not figure this one out.
There is no way to change your machine into printer mode only.
machine works in dual mode copier/printer.whenever you send a print from the computer, machine automatically receive the document and print it at the same time without changing the mode.like SCAN MODE AND HARD DISK MODE.
So if you are facing a problem regarding printing then please check the paper size of the machine, and also check the paper size from the "PRINTING PREFERENCES" by taking the properties of printer icon in printer and faxes menu.(where installed printers shows) right click on the bizhub 200 printer icon and clickj on "properties". now click on "printing preferences" tab and then click on "size" tab, now from here check the paper size.its A4 or not if its not A4 then please change it to A4 then again give a print command.machine will start printing.
Ckeck the glass on the left side it is about 1inck by 12 inch for white out on it also clean the optics.On your curling problem install fresh paper you can check your fuser temp. in sim 43-1 change it to 180.
I had the same problem and re-powered the unit, then hit the "COPY" button then hit the "BLACK" button and it worked!
when using copying mode, prints well until 3/4 way through, then slows and prints only black from then on
×